The Used Radial drill TOS Kovosvit VR 4 in Czech has been sold. --- We found you similar items below:

Used CARLTON 1A RADIA

CARLTON (USED) MODEL 1A RADIAL ARM DRILL RATED CAPACITY ............. 4' X 11" SPINDLE .................... MT4 SPINDLE TRAVEL ............. 12" T-SLOTTED TABLE ............ 16" X 22" WITH PLATFORM ............ 24" X 44" T-SLOTTED BASE ............. 34" X 57" 6 FEED SPEEDS .............. 6 - 25 12 SPINDLE SPEEDS .......... 60 - 1500 RPM MOTOR ...................... 5 HP, 3 PHASE VOLTS ...................... 220/440 EQUIPPED WITH COOLANT SYSTEM ELECTRIC CLAMPING ON COLUMN

  • Manufacturer CARLTON
  • Model 1A RADIAL ARM DRILL
  • Category Drills, Drills, radial arm
Used CSEPEL RFH75/200

SPECIFICATIONS LENGTH OF ARM: 78” COLUMN DIAMETER: 16″ DISTANCE SPINDLE TO BASE: 32” TO 68” VERTICAL TRAVEL OF SPINDLE: 15” SPINDLE SPEED RANGE: 15 – 1,500 RPM SPINDLE TAPER: #5 MT SPINDLE MOTOR: 30 HP GENERAL ELECTRICS: 440 VOLTS, 3 PH, 60 CYC DIMENSIONS: 127” LR X 44” FB X 133” H APPROXIMATE WEIGHT: 18,000 LBS EQUIPPED WITH THREADING POWER CLAMPING ON HEAD, ARM & COLUMN POWER RAPID TRAVERSE COOLANT BASE WITH COOLANT PUMP 22” X 32” TILTING BOX TABLE

  • Manufacturer CSEPEL
  • Model RFH75/2000 RADIAL DRILL
  • Category Drills radial
Used Reconditioned 20

Drill/Tap Electric Clamping to Head/Column and Arm Tilting Box Table Coolant System T-Slotted Base

  • Manufacturer OOYA
  • Model RE3-2500 RADIAL ARM DRILL
  • Category Radial drills
Used 1961 CARLTON 3A

SPECIFICATIONS COLUMN DIAMETER: 15″ LENGTH OF ARM: 72” FACE OF COLUMN TO CENTER OF SPINDLE: 13” – 72” SPIDLE RADIUS: 2’ – 83” DISTANCE SPINDLE TO BASE: 10.5” TO 66” HEIGHT OF BASE: 8” VERTICAL TRAVEL OF SPINDLE: 18” SPINDLE DIAMETER: 3-3/16” SPINDLE TAPER: #5 MT VERTICAL TRAVEL OF ARM TO COLUMN: 37.5” HORIZONTAL TRAVERSE OF HEAD ON ARM: 57” DRILLS TO CENTER OF CIRCLE: 144” SWING OF ARM: 100” SPINDLE SPEEDS: 36 SPINDLE SPEED RANGE: 15-1500 RPM GENERAL APPROXIMATE DIMENSIONS: 153” LR X 42.5” FB X 120” H APPROXIMATE WEIGHT: 20,000 LBS ELECTRICS: 460 VOLTS, 3 PH, 60 CYC EQUIPPED WITH THREADING POWER CLAMPING ON HEAD, ARM & COLUMN POWER RAPID TRAVERSE COOLANT BASE W/ COOLANT PUMP 28” X 32” TILTING BOX TABLE

  • Manufacturer CARLTON
  • Model 3A RADIAL DRILL
  • Category Drills radial
Used 1980 POLAMCO WRA

SPECIFICATIONS COLUMN DIAMETER: 13″ LENGTH OF ARM: 54” MAXIMUM DRILLING DIAMETER IN MILD STEEL: 1-5/8” MAXIMUM DRILLING DIAMETER IN CAST IRON: 2” SPINDLE TAPER: #5 MT SPINDLE REACH: 10” – 48” DISTANCE BETWEEN SPINDLE AND BASE PLATE: 14-5/8” – 62-3/16” WORKING SURFACE ON PLATE: 59” X 35-1/2” T-GROOVE WIDTH: 7/8” DISTANCE BETWEEN GROOVES: 9-1/16” SPINDLE SPEEDS (15): 20 – 2,500 RPM SPINDLE FEEDS (15): .0025 – .0984 IPR MOTOR: 5 HP GENERAL ELECTRICS: 480 VOLTS, 3 PH, 60 CYC APPROXIMATE WEIGHT: 8,000 LBS DIMENSIONS: 87” LR X 36” FB X 112” H EQUIPPED WITH DIGIPAC 1-AXIS DRO ON QUILL COOLANT

  • Manufacturer POLAMCO
  • Model WRA-40 RADIAL DRILL
  • Category Drills radial
Used 1973 CARLTON 5A

SPECIFICATIONS COLUMN DIAMETER: 26″ LENGTH OF ARM: 120” COLUMN TRAVEL ON RUNWAY: 204” MINIMUM FACE OF COLUMN TO CENTER OF SPINDLE: 16.5” MAXIMUM FACE OF COLUMN TO CENTER OF SPINDLE: 138” MINIMUM DISTANCE SPINDLE TO BASE: 54.5” MAXIMUM DISTANCE SPINDLE TO BASE: 124” SPINDLE TRAVEL: 24” SPINDLE TAPER: #6 MT SPINDLE SPEEDS: 12 – 1,200 RPM FEEDS (18): .004 – 125 IPR SPINDLE MOTOR: 50 HP GENERAL ELECTRICS: 230/440 VOLTS, 3 PH, 60 CYC APPROXIMATE WEIGHT: 60,000 LBS EQUIPPED WITH PALM BUTTON PENDANT CONTROL COOLANT POWER ELEVATION POWER CLAMPING BOX WAYS NOTE: 24’ X 10’ T-SLOTTED FLOOR PLATE AVAILABE AT AN ADDITIONAL COST

  • Manufacturer CARLTON
  • Model 5A RADIAL DRILL
  • Category Drills radial