The Pullmax Model Z-31 Angle Bending Roll with Pendant has been sold. --- We found you similar items below:

Used PULLMAX Z33 ANGL

PULLMAX (USED) MODEL Z33 ANGLE ROLL ANGLE CAPACITY .......... 4" X 4" X 1/2" SHAFT DIAMETER .......... 3.5" ROLL DIAMETER ........... 11" MOTOR ................... 6.6 HP EQUIPPED WITH DRO ON LOWER ROLL POSITION MOVABLE PENDANT CONTROL

  • Manufacturer PULLMAX
  • Model Z33 ANGLE ROLL
  • Category Rolls, Rolls, angle bending
Used Pullmax X91 1" M

MODEL ........................... X91 MAXIMUM PLATE THICKNESS ......... 2" ANGLE OF BEVEL .................. 25 TO 55 DEGREES BEVEL WIDTH @ 30 DEGREES ........ 7/8" BEVEL WIDTH @ 37-1/2 DEGREES .... 25/32" BEVEL WIDTH @ 45 DEGREES ........ 23/32" DIAMETER OF CUTTING WHEEL ....... 7-7/8" MAXIMUM BEVELING SPEED .......... 12 FPM BEVEL STRAIGHT OR CURVED PLATE .. YES MOTOR ........................... 7-1/2 HORSEPOWER

  • Manufacturer Pullmax
  • Model X91
  • Category Bevelers
Used Pullmax X91 MODE

SERIAL .......................... 52210-25 MODEL ........................... X91 MAXIMUM PLATE THICKNESS ......... 2" ANGLE OF BEVEL .................. 25 TO 55 DEGREES BEVEL WIDTH @ 30 DEGREES ........ 7/8" BEVEL WIDTH @ 37-1/2 DEGREES .... 25/32" BEVEL WIDTH @ 45 DEGREES ........ 23/32" DIAMETER OF CUTTING WHEEL ....... 7-7/8" MAXIMUM BEVELING SPEED .......... 12 FPM BEVEL STRAIGHT OR CURVED PLATE .. YES MOTOR ........................... 7-1/2 HORSEPOWER

  • Manufacturer Pullmax
  • Model X91
  • Category Shears
Used Pullmax X8 BEVEL

SERIAL ............................... 59828 MODEL ................................ X8-37.5 MAXIMUM V-GROOVE DEPTH (MILD STEEL) .. 3/8" MAXIMUM V-GROOVE DEPTH (STAINLESS) ... 9/32" CUTTING SPEED ........................ 6 TO 11 FPM ANGLE OF BEVEL ....................... 37-1/2 DEGREES MAXIMUM MATERIAL THICKNESS ........... 2" MAIN MOTOR ........................... 2-1/2 HORSEPOWER

  • Manufacturer Pullmax
  • Model X8
  • Category Bevelers
Used Pullmax X8-30 3/

SERIAL ............................... 58879 MODEL ................................ X8-30 MAXIMUM V-GROOVE DEPTH (MILD STEEL) .. 3/8" MAXIMUM V-GROOVE DEPTH (STAINLESS) ... 9/32" CUTTING SPEED ........................ 6 TO 11 FPM ANGLE OF BEVEL ....................... 37-1/2 DEGREES MAXIMUM MATERIAL THICKNESS ........... 2" MAIN MOTOR ........................... 2-1/2 HORSEPOWER

  • Manufacturer Pullmax
  • Model X8-30
  • Category Bevelers
Used 1983 SMT-PULLMAX

10' X 1/2" SMT PULLMAX HYDRAULIC POWER SHEAR PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $29,500.00 Stock # 15096-P Serial # 3348 New Date: 1983 Model: GSA-430 Made in Sweden Rated Capacity: 10' x 1/2" Mild Steel 5/8" x 8' (At 75% of Maximum Angle) Gap in Frame: 12" Stroke Rate: 18 to 33 SPM Cutting Rake Angle: 0.5 to 4 Degrees Front Operated Back Gauge: 36" with Digital Read Out Knife Size: 3/4" Thick x 3" Wide x 61" Long x 9 Holes per Section (Note: Requires 4 Knives for a Full Set.) Distance Floor to Bed Height: 37" EQUIPPED WITH: Flush Floor Design Power Rake Angle with Digital Read Out Power Blade Gap with Digital Read Out Adjustable Stroke Control (13) Hydraulic Hold-Downs Flip Down Back Gauge 56" Long Squaring Arm on Machine (Note: A 61" Long Piece Has Been Cut Off the Squaring Arm.) (It is There and Can Be Reattached to the 56" Long Section.) (2) Adjustable Squaring Arm Stock Stops Several Used Extra Knife Sections Electric Movable Foot Pedal Trip Control Swing Up Blade Guard for Each Side of Machine (3) Table Filler Blocks with Ball Transfers: 20" x 16" x 4" High Each Crane Lifting Hooks on Machine for Easy Rigging Hydraulic Oil Capacity: 100 Gallons Young Radiator Type Oil Cooler ELECTRICS: ? HP Back Gauge Motor 1/2 HP Oil Cooler Motor, 208-220-440 Volts 30 HP Hydraulic System Motor Wired for 3 Phase, 230/460 Volts (22 KW) Presently Wired for 220 Volts Has Multi Tap Transformer, 220 to 550 Volts DIMENSIONS: Overall Machine Size: 145" L-R x 89" F-B (Without Squaring Arm) x 105" High x 25,500 Lbs. Skid with Extra Knives and Parts: Estimated 70" L-R x 31" F-B x 15 High x ? Lbs.

  • Manufacturer SMT-PULLMAX
  • Model GSA 430
  • Category Shears, power squaring