The Used MORBARK Morbark Waste Recycler in Moberly, MO has been sold. --- We found you similar items below:
Heavy duty diesel powered horizontal feed Wood Grinder with 1050 HP, C-27 CATERPILLAR diesel engine. 36" x 61 3/8" hammermill system constructed of heavy-duty 25 1/2" diameter rotor, (16) 1-1/8" thick two-piece laser cut rotor platesto insure precision and enforce steel strength. Hammermill consists if (18) 2" balanced steel heavy-duty hammers, (18) 3-1/16" wide double edged replacable inserts and 18 rakers. 18'long x 60" wide live floor chain infeed equipped with four strands of WDH-120 chain in a staggered configuration with direct drive. Discharge system consists of a hydraulic driven, horizontal 48" wide x 22' long aggregate belly belt conveyor discharging onto a 36" wide stacking conveyor with hydraulic fold for transport. Track and Drive: 325L Caterpillar undercarriage with 600mm double grouser pads provides ground clearance of 20". MORBARK durability, value and proven drive line protection that helps protect against contaminants damaging the machine. Capable of producing 375 - 500 cubic yards of waste per hour. Gross Weight 89,000 Lbs; Approx 2,600 Hours on meter.
Ø 25 cm; 3-point linckage, PTO driven 1000 RPM, 50 – 85 HP required, Double Feedwheel, Own hydraulic system, 360° turnable discharge pipe
750 HP Caterpillar, ± 8650 hours; Magnetic headpulley on foldable discharge conveyor; Rotor with fixed hammers and replacable bits; Tripple-axle trailer conform European road regulations;
Heavy duty diesel powered horizontal feed Wood Hog Grinder with 860 HP, 3412 CATERPILLAR diesel engine. Ballanced forged steel hammers. Live floor chain infeed. MORBARK durability, value and proven drive line protection that helps protect against contaminants damaging the machine. Capable of producing 300 - 400 cubic yards of waste per hour. Gross Weight 78,000 Lbs; 3,100 Hours on meter.
Ø 25 cm, 3-point linkage; PTO driven 1000 RPM; 50 - 85 HP required; double Feedwheel, own hydraulic system; Folding infeed chute; Easy knife change; High Tipper backwards, hinge at 2.3 m; Capacity ca. 6 m3; Total height 2.7 m; Width only 1.86 m; Total weight ca. 2.3 ton; Hydraulic brakes;
360° turnable discharge spout; 80 HP Cummins diesel engine; Infeed opening 23 x 41 cm; Autofeed; 80 km/h chassis; own weight 2.600 kg;