Used Machine Tools in Saxony, Germany

AS TECH Hydraulic nut

• Manufacturer: AS TECH

Hydraulic nut AS TECH HWS16111131 7550.04 KG4 158 kN 700 bar used, tested !

HOFFMANN cooling unit

• Manufacturer: Hoffmann

Cooling unit for coolant HOFFMANN ERK 210-V Connected load 11 kW 380 V used, tested !

FILTER TECHNOLOGY GERA Coolant system

• Manufacturer: FILTER TECHNOLOGY GERA

Coolant system FILTER TECHNOLOGY GERA Coolant system incomplete ( drive for the belts is missing (picture 2) ) with 4 Brinkmann pumps TBR63/270 (2 times) TB303/370-T TB250/350 New !

AMK chip conveyor

Chip conveyors, hinged plate belt chip conveyors AMK AUTOMATION Type 1100 x 430 Drive motor: 0.25 kW 230 / 400 V 3AC Coolant pump: SCHMALENBERGER SM 32-13/2 Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / ...

GESAU Drill

• Manufacturer: Pagus

Step drill with internal cooling GESAU ( Ø14,5x23,5/120°x25x110 ) with internal cooling ! New !

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

PROGRESS Magnetic disk

Magnetic plate, magnetic chuck, magnetic table, electric PROGRESS ELECTROMAGNET ELSTERWERDA FE200/600 TGL 10272 0.11 kW 110 V DC 0.5 A IP65 approx. 1.5 m connection cable with plug used, tested !

WMW side clamps

• Manufacturer: WMW

Side tensioner, tensioner WMW 110 x 50 mm Jaw can be used on both sides ! 4x slotted hole: Ø 21 x 60 mm, height: 46 mm threaded spindle with 2x hexagon head, width across flats: 17 mm used, tested !

WMW clamping prism

• Manufacturer: WMW

Clamping prism, clamping prism, prism, 4 pieces WMW Other quantities on request ! used, tested !

Angled table 1800 x 1500 mm

Angle table, clamping angle used, tested ! Clamping: 1.800 x 1.500 mm | Dimensions: 1500 x 950 x 1800 mm

WMW clamping angle

• Manufacturer: WMW

Clamping angle WMW Tensioning hole: Ø 60 mm, depth: 25 mm ( continuous ) used, tested !

PAGUS tilting table

• Manufacturer: Pagus

Tilting table, clamping table, sine table PAGUS 250 x 180 mm approx. 75° tiltable Groove in base plate: groove width: 14 mm, groove depth: 4 mm used, tested !

PROGRESS Magnetic disk

Magnetic plate, magnetic chuck, magnetic table, electric PROGRESS ELECTROMAGNET ELSTERWERDA FE200/600 0.11 kW 220 V DC 0.5 A IP65 used, tested !

WALKER - HAGOU Magnetic plate

• Manufacturer: Walker

Magnetic plate, permanent magnetic, tiltable WALKER - HAGOU MOD. 20 used, tested !

STANKO clamping angle

• Manufacturer: Stanko

Clamping angle STANKO 2x slotted hole: Ø 20, length: 120 mm used, tested ! 85 KG (heavy duty version)