• HOLZ HER SPEEDY 207 CNC POINT TO POINT DRILL

    $14,950 - Matthews, NC Recently Added
    • Manufacturer: Holz-Her

    55" x 29-1/2" work zone; 110" panel length; 2" max panel thickness; 5 vertical spindles; 2 horizontal chucks (x axis); grooving saw (x axis); 3-1/2" disc drive with rs-232; longitudinal stoke(x axi...

  • 1998 RITTER R-42-3

    $7,250 - Matthews, NC Recently Added
    • Manufacturer: Ritter

    ritter r-42 double row boring machine | used two each 21 spindle fixed center boring heads on 32mm centers 3 hp motors driving the boring heads spacing from 5"-30" between fixed center heads adjust...

  • NANDINA M-2-H

    $5,450 - Matthews, NC Recently Added
    • Manufacturer: NANDINA

    used nandina m 2h line boring machine (2) line boring heads of (22) spindles each on 32 mm centers, drills from bottom up drills vertically form the bottom up, 27.7" distance from first and last sp...

  • 1998 MORBIDELLI FM 400 DA

    $24,000 - Matthews, NC Recently Added
    • Manufacturer: Morbidelli

    feed thru drilling machine equipped as follows: (2) horizontal drilling heads one on the right & one on the left each with 20-spindles @ 32 mm centerdistance each with 1.8 hp motor & 3,000 rpm (6) ...

  • 1998 MORBIDELLI ( FM-400-DA ) AUTOMATIC FEED THROUGH BORER

    $26,500 - Matthews, NC Recently Added
    • Manufacturer: Morbidelli

    morbidelli automatic feed through borer model: fm 400 da two (2) horizontal drilling heads (one on the right & one on the left) each drilling head has twenty (20) spindles @32mm center distance and...

  • 1998 SCMI ( TECH 99L ) CNC POINT TO POINT

    $15,995 - Matthews, NC Recently Added
    • Manufacturer: SCM

    ( 10 ) vertical spindles. 1 + 1 horizontal in the y axis and 1 + 1 in the x axis 4 position tool changer, iso tool holders includes: kvara controller, grooving saw in the x axis, and multi volt tra...

  • MAGGI 4632

    $12,595 - Matthews, NC Recently Added
    • Manufacturer: Maggi

    (2) 23-spindle heads on 32 mm centers, (2) 1.5 hp - 2,800 rpm motors, 5" min. and 25-19/32" max. working width between heads, 4" drilling stroke, drills vertically from bottom so chips fall out of ...

  • 1987 DITCH WITCH 3610

    $8,000 - Brasstown, NC
    • Manufacturer: Ditch Witch
    • Model: 3610

    1987 ditch witch 3610 in good overall condition fueltype is diesel with 788 hours. has a newer engine. 6 way backfill blade with 2yr old shark chain. comes with 1999 belche trailer 12.5 bucket and ...

  • 1999 DITCH WITCH 3610

    $5,250 - Brasstown, NC
    • Manufacturer: Ditch Witch
    • Model: 3610

    1999 ditch witch 3610 in poor overall condition fueltype is diesel with na hours. frame only. comes with 2003 hudson trailer with tilt

  • 2011 YOUJI CNC Vertical Boring Mill w/C Axis and Milling

    No price - Indian Trail, NC Recently Added
    • Manufacturer: YOUJI

    equipped with: fanuc 18i-tb cnc control, 4-jaw table, ram head w/milling, chip conveyor