• Extruder, Mixer, 6", S/st, 10 HP, Pasta

    No price - San Dimas, CA

      pasta mixer/ extruder, stainless steel, complete with 3' x 3' x24" deep tapered bottom hopper with single wand agitator and 6" diameter twin lead screw discharge. provisions for addition of die ...

    • NRM PACEMAKER III 3.5″ EXTRUDER

      No price - Elk Grove Village, IL
      • Manufacturer: NRM

      nrm pacemaker iii 3.5″ extruder, s/n 15971, 32:1 l/d, 100 hp 550v 1750 rpm d/c motor thru 14.9:1 gearbox, air cooled vented barrel with a 42″ centerline, 7″ x 3.5″ oval in-feed throat, no drive or ...

    • BERSTORFF 140mm (5.5") SINGLE SCREW EXTRUDER

      No price - Elk Grove Village, IL

        berstorff 140mm (5.5") single screw extruder, s/n 90100005-31/2001, approximate 18:1 l/d, oil heated two zone barrel, oil heated feed throat with hopper, approximate 20" centerline, driven by a 160...

      • DAVIS STANDARD MODEL 165MM60TPIH 6.5" EXTRUDER

        No price - Elk Grove Village, IL
        • Manufacturer: DAVIS STANDARD

        davis standard model 165mm60tpih 6.5" extruder, s/n x7206, 27:1 l/d, 150 hp dc motor, 100 rpm screw speed, 526 hp rated gearbox with a 1.5 service factor, no feed throat, no control panel, 16′ long...

      • GLOUCESTER 6" EXTRUDER, NO MODEL NUMBER

        No price - Elk Grove Village, IL
        • Manufacturer: GLOUCESTER

        gloucester 6" extruder, no model number, no s/n, 30:1 l/d, electrically heated water cooled 6 zone vented barrel with screw and clamp, no motor, 42" center line, 1 hp 6" x 11" oval in-feed bridge b...

      • BATTENFELD/GLOUCESTER MODEL 45320R3 4.5" EXTRUDER

        No price - Elk Grove Village, IL
        • Manufacturer: Battenfeld

        battenfeld/gloucester model 45320r3 4.5" extruder, s/n 39369-05, 30:1 l/d, 150 hp 3400 rpm d/c drive motor into 33.95:1 gearbox, 4140 steel 5 zone barrel, water cooled via closed loop system, 44" b...

      • CROWN 4.5" 32:1 L/D EXTRUDER

        No price - Elk Grove Village, IL
        • Manufacturer: Crown

        crown 4.5" 32:1 l/d extruder, no s/n, 300 hp 1750/1900 rpm d/c motor to directly driven gearbox, water cooled and vented 150" long barrel with a 60" centerline (42" centerline if included riser is ...

      • WELEX MODEL 350-30 3.5″ EXTRUDER

        No price - Elk Grove Village, IL
        • Manufacturer: WELEX

        welex model 350-30 3.5″ extruder, s/n: 262, 30:1 l/d, having five barrel, one adapter, and 4 die zones, bc-580 temperature controls, non-vented barrel at a 50″ centerline, lufkin gear box ratio 7.7...

      • MANUFACTURE 4.5" EXTRUDER, 34:1 L/D

        No price - Elk Grove Village, IL

          unknown manufacture 4.5" extruder, 34:1 l/d, 8.5" square in-feed, electrically heated and water cooled 6 zone barrel with screw, belt drive design, 42" centerline, mounted on adjustable height cast...

        • NRM/DAVIS STANDARD MODEL 3.5PMIV RH/WC VTD/PLGO 3.5" EXTRUDER

          No price - Elk Grove Village, IL

            nrm/davis standard model 3.5pmiv rh/wc vtd/plgo 3.5" extruder, s/n 19222, 24:1 l/d water cooled 7 zone vented and plugged barrel, approx 100-150 hp d/c motor belt driven 15.12:1 gearbox with a 1.25...