search
  • 5/16" NAKASHIMADA PF-860 2 DIE 3 BLOW HEADER

    No price - Ivyland, PA
    • Manufacturer: PPM
    • Weight: 22,100 LBS

    5/16" nakashimada model pf-860 2 die 3 blow header maximum cut-off diameter: .315" (8mm) maximum cut-off length: 3.150" (80mm) production speed: 50-120 ppm approximate weight: 22,100 lbs

  • 5/16 NATIONAL 56 2 DIE 3 BLOW COLD HEADER

    No price - Ivyland, PA Recently Added
    • Manufacturer: National

    equipped with: set for heat trim pko rko rko electrical specs: 440 v / 3/60 | pieces per minute: 150/100/75

  • 3/16" WATERBURY #1 2 DIE 4 BLOW HEADER

    No price - Ivyland, PA
    • Manufacturer: WATERBURY
    • Weight: 2800 LBS

    equipped with: w/split punch block lincoln pressure lube system

  • 5/16" NATIONAL MODEL 56 2-DIE 3-BLOW COLD HEADER

    No price - Ivyland, PA
    • Manufacturer: National

    equipped with: pko, tko & trim, die relief

  • 1/4" NATIONAL MODEL 34 2-DIE 3-BLOW COLD HEADER

    No price - Ivyland, PA
    • Manufacturer: National

    equipped with: supported ko 1st and 2nd die 10 roll straightener provisions for both tko & trim

  • 7/64" NAKASHIMADA PF-210 2 DIE 3 BLOW COLD HEADER

    No price - Ivyland, PA Recently Added
    • Manufacturer: PPM
    • Weight: 2,500 LBS.

    equipped with: reconditioned by nakashimada 2010 dead point monitor

  • 3/8" WATERBURY #3 2 DIE 4 BLOW UNIVERSAL TRANSFER HEADER

    No price - Ivyland, PA
    • Manufacturer: PPM
    • Weight: 17,000 LBS

    electrics: 480 / 60 hz /3 phase | approx. weight: 17,000 lbs | maximum production: 100 ppm | approx. floor space: 68" x 120" | maximum wire diameter: 3/8" (.350") | maximum transfer length: 3-1/4"...

  • 1/4" ASAHI OKUMA AOT-6L 2 DIE 2 BLOW COLD HEADER

    No price - Ivyland, PA
    • Manufacturer: Okuma
    • Weight: 9000 LBS

    equipped with: bushing cut off pko approx. size: 4'6" x 11' | approx. weight: 9000 lbs | maximum production: 250 ppm | maximum shank length: 2" (50mm) | maximum cutoff length: 2-3/4" (70mm) | minim...

  • 1989 Asahi-Okuma AT-425 3/16" 2 Die Blow High Speed Cold Header

    $30,500 - Connecticut, USA
    • Manufacturer: Okuma

    used 3/16" asahi okuma model at-425. 2 die, 2 blow high speed cold header, serial no t-425-2-007, new 1989 (4mm) .156 maximum cutoff diameter (40mm) 1 9/16" maximum cutoff length (25mm) 1" maximum ...

  • 5/16" NAKASHIMADA PF-860 2 DIE 3 BLOW COLD HEADER

    No price - Ivyland, PA
    • Manufacturer: PPM
    • Weight: 22,100 LBS

    equipped with: pko 2nd & 3rd punches approx. weight: 22,100 lbs | production speed: 50 - 120 ppm | 1st die k.o. stroke: 4.528" (115mm) | 2nd die k.o. stroke: 2.363" (60mm) | 2nd punch k.o. stroke: ...