Used 4 head drill

- 1076 listings found
Sort by Price: Low to High | High to Low
  • 24" Solberga Geared Head Drill Press

    • Manufacturer: Solberga
    • Capacity: 1.75"

    motor: 2-hp | spindle travel: 7.785" | depth of throat: 13" | spindle diameter: 3.125" | spindle feeds (4): .004/.008/.012/.016 ipr | spindle speeds (8): 48-1584 rpm | distance spindle to base: 35" - 49.5" | ver...

    No price
    Farmingdale, NY, USA
  • FOSDICK RADIAL DRILL 4' X 15"

    • Manufacturer: Fosdick

      Capacity: 4' x 15" 5-3/4" diameter spindle with #6 mt 36 spindle speeds: 17 - 1800 rpm feed changes: .003 - .077 ipm power clamping power elevation rapid on the head work light coolant system motor: 10 h.p.

      No price
      Cleveland, OH, USA
    • Rockwell Multi-Head Drilling Machine, 6 Drills, 101"x29"x33" Table, Good ConditionRockwell Multi-Head Drilling Machine, 6 Drills, 101"x29"x33" Table, Good Condition

      • Manufacturer: Rockwell

        Table dimensions (lxwxh): 101" x 29" x 33" distance between drill press spindles: 15" distance from drill chuck to back column: 8.5" column height (from table): 38.5" 6 drill heads 3/4 horse power 220/440 volts t...

        $1,950 (USD)
        Watertown, CT, USA
      • CARLTON RADIAL DRILL

        • Manufacturer: Carlton

          Capacity: 4' x 15" 36 spindle speeds: 15 - 1500 rpm 18 feed changes: 4 - 125 ipm 4 thread changes: 8, 11 1/2, 14 & 18 tpi power clamping power elevation (approximately 36" vertical travel) power left & right on t...

          No price
          Cleveland, OH, USA
        • 4' x 13", IKEDA, 1979,

          • Manufacturer: Ikeda

            Model: rm-1375 new: 1979 specifications: max. distance column to spindle center.......... 54 1/2" min. distance column to spindle center.......... 9" max. distance between spindle and base.......... 56 3/4" min. ...

            No price
            Bedford, OH, USA
          • 4 Spindles Powermatic 1150A MULTI-SPINDLE DRILL, Vari-Speed Heads,#33JarnoTaper,3/4 HP,Drill Chucks

            • Manufacturer: Powermatic
            • Capacity: 5/8"
            • Weight: 1,750 LBS.

            15" four spindle powermatic speed drill press model: 1150a s/n: 615752, 4, 6 & 7 new: 1970's specifications: drill to center of circle.............. 15" drill capacity, cast iron.............. 5/8" steel............

            No price
            Harrison, NJ, USA
          • Carlton 4' 9" Radial Drill New 1979

            • Manufacturer: Carlton

              Pre owned  1979 carlton 4’ x 9” radial arm drill serial number  qa 1253 general specifications arm length                     4'
column diameter                9"
maximum spindle radius             55"
minimum s...

              No price
              Milwaukee, WI, USA
            • 1987 CME Drill CME 75 Drill Rig #12975

              • Manufacturer: CME

                1987 cme 75 drill rig has 3l6 moyno pump cat head 2 winches 4 cylinder gas engine the rig runs good mounted on a 1988 ford 750 tandem axle (note: truck is in poor condition). also a brand new auto hammer in box t...

                No price
                Mifflinburg, PA, USA
              • VERNET BEHRINGER FP600 3 HEAD CNC DRILL LINE, 43' INFEED, 40' FRONT CONVEYOR

                • Manufacturer: Behringer

                  Specifications: manufacturer.................... vernet behringer model........................... fp600 cnc new............................. 2000 capacity usefull section............. 23.6" x 13.4" angles..........

                  No price
                  Helena, AL, USA
                • 16188 1966 15" POWERMATIC 4-SPINDLE DRILL 1150

                  • Manufacturer: Powermatic

                    15" powermatic 4-spindle drill price: loaded on truck, our warehouse, york, pa ………… $2,950.00 hmc stock no. 16188-p machine serial no. 66-5643, 44, 45, 46 machine model no. 1150 new date: 1966 table surface wor...

                    $2,950 (USD)
                    York, PA, USA