• 1320mm SMS 4-HI COLD ROLLING MILL

    No price - Newark, NJ
    • Manufacturer: SMS
    • Weight: 26t

    strip width: 800mm - 1320mm strip thickness: 0,4mm - 4mm coil dimensions: 610mm - 2160mm max. coil weight: 26t gear ratio of winder drives: i1 = 25055; i2 = 1.5 max. rolling speed: 240/400m/min (...

  • 96" Bliss Reversing 4-Hi Roughing Mill

    No price - Roxboro, NC
    • Manufacturer: Bliss

    mill drive: 5000hp reversing motor 700 vdc 35-70 rpm united 42" roller bearing pinion stand | work rolls: 30" diam roller bearings | manufacture: bliss / 1960 | roll change: hydraulic sled for b/u...

  • Valtra T190 Hi-tech+50km/h+t.aj

    $46,983 - Kokkola, Finland
    • Manufacturer: Valtra

    four-wheel drive 50 km / h speed ​​gear electrical / hydraulic reversing shuttle, front axle suspension power lifting equipment front linkage front electric controller hydraulic brake valve compres...

  • 2006 Terex Skylift Hi Ranger TL 38P

    $42,000 - Clearwater, FL
    • Manufacturer: Terex

    2006 terex skylift hi ranger tl 38p in good overall condition fueltype is unleaded enginemake vanguard engine hp 18 hp. 38' mini arborist telescoping bucket lift. will fit through standard 36 gate...

  • 1981 Rowe/Voss Cut To Length Line 66/1.750 - 19/7, 6 HI

    No price - Toledo, OH
    • Manufacturer: Rowe

    year: 1981 coil width: 60" coil weight: 40,000 lb coil id: 20" - 24", fillers to 30" coil od: 72" gauge range: 0.025" - 0.1...

  • 1600 kW Caterpillar G3520 Landfill Gas Generator Set

    No price - Ardmore, PA
    • Manufacturer: Caterpillar
    • Model: SR-4

    rpm: 1200 | amps: 781 amp | hertz: 60hz | phase: 3 | rating: 1600 kw | unit #: 51638 | voltage: 277/480 | engine model: g3520 | additional features: 0 hour cat g3520, completely rebuilt by cat wit...

  • 5" (130mm) x 15" (390mm) x 13" (340mm), FROHLING, 4 STAND 4-HI COLD

    No price - North Branford, CT
    • Manufacturer: DANIELI FROHLING G.M.B.H. (GERMANY)

    machine# 13026 specifications: manufacturer: danieli frohling g.m.b.h. (germany) type: 4 stand 4-hi cold rolling mill use: reduce ...

  • 2014 BOMAG BW213D-4 18I

    $99,500 - Brandywine, MD Recently Added
    • Manufacturer: BOMAG
    • Model: BW213D-4
    • Hours: 126.4

    84 drum, hi/low frequency cab: erops | front: 84 | hours: 126.4 | trans: auto | brakes: hydro | engine: diesel | ac/heat: yes | vibratory: yes | tires rear: 23.1-26r3 | operating weight: 12,525

  • 5" (127mm) x 16" (406mm) x 16" (406mm), BLISS, 4-HI REVERSING MILL

    No price - North Branford, CT
    • Manufacturer: Bliss

    machine# 13022 specifications: manufacturer: e.w. bliss co. (u.s.a.) type: 4-hi cold reversing mill w/agc work roll size: 5" (127mm) dia. 15 1/2" (394mm) face work roll bearings: timken roller b...

  • 8" FENN 2/4 HI DESIGN ROLLING MILL

    No price - Newark, NJ
    • Manufacturer: Fenn

    manufacturer: fenn serial # 119 general specifications: 5" dia. back up roll 1 1/2" dia. work roll 8" roll face 39" pass line manual vertical roll adjustment roll bearings 10 hp ac motor,...