• 2014 HAAS ST-35Y MULTI-AXIS CNC LATHE TK-20609

    $84,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Haas

    chuck size: 12″ cutting length without work holding: 23” bar capacity: 4” between centers: 30” x-axis: 12.5″ y-axis: +2.0” z-axis: 23″ rapids on x/y-axis: 472 ipm rapids on z-axis: 945 ipm maximum ...

  • 1995 MORI SEIKI ZL-15SMC 5-AXIS CNC LATHE JV-20593TK

    $29,900 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Mori seiki

    x-axis travel (upper / lower): 8.7″ / 7.7″ z-axis travel (upper / lower): 17.7″ / 15.4″ spindle speed: 50 – 5,000 rpm spindle nose: a2-5 hole trough spindle (main): 2.0” hole trough spindle (sub): ...

  • 2013 DOOSAN LYNX 220LMSC MULTI-AXIS CNC LATHE TK-20574

    $74,500 - Bethlehem, PA, USA
    • Manufacturer: Doosan

    x-axis: 8.1″ z-axis: 21.7″ b-axis: 21.7” rapid traverse (x-axis): 1,181 ipm rapid traverse (z-axis): 1,417 ipm rapid traverse (b-axis): 1,181 ipm cutting feedrate: 19.7 ipm spindle speed: 4,500 rpm...

  • 2000 TOPPER TNL-100A CNC LATHE HB-20430IP

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: TOPPER
    • Spindle Bore: 2.4”
    • Spindle Nose: A2-6

    motor: 20 hp dimensions: 144” lr x 56” fb x 68” h weight: 7,770 lbs fanuc o-tb control 5c collet chuck topper bf-1200 barfeeder chip conveyor parts conveyor tailstock since we are acting as a broke...

  • Mazak M4-1000

    $9,900 - Watertown, CT, USA Recently Added
    • Manufacturer: Mazak

    make: mazak model: m4-1000 serial: 40527 new in 1982 max swing: 22" max swing overbed: 22" max swing over cross slide: 11" center distance: 38" spindle bore: 3.15" spindle nose: jis a2-8 spindle sp...

  • 2000 EMCO MAIER EMCOTURN 345-II CNC LATHE TK-20600

    $22,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Emco
    • Distance between Centers: 20.1”

    speed range: 0 – 6,000 rpm torque of main spindle: 58 ft/lbs spindle nose: a2-5 spindle bore: 2.1” motor: 15 hp turret: 8 stations tool holders: vdi-30 taper: mt #4 dimensions: 105” lr x 72” fb x 8...

  • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Milltronics

    spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

  • 1996 HARDINGE CONQUEST T42 CNC LATHE CK-20091

    $22,000 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    standard: 10 hp torque rating: 42 ft-lb speed range (1-rpm steps): 50 to 5,000 rpm swing diameter over upper way cover: 21.2″ preloaded ball screw diameter: 1.259″ maximum x-axis travel: 5.31″ x-ax...

  • 1991 HARDINGE GT-27SP GANG TOOL CNC LATHE JV-20350TK

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    x-axis: 12″ z-axis: 11″ x-axis traverse rate:    472 ipm z-axis traverse rate:    630 ipm spindle motor: 5 hp speed range: 60 – 6,000 rpm allowable weight on spindle: 11.259″ 5c spindle work holdin...

  • 1966 HARDINGE HC CHUCKER TK-18875

    $5,950 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    with round 5c hardinge collets: 1-1/16″ with hexagon 5c hardinge collets: 7/8″ with square 5c hardinge collets: 3/4″ with step chucks: 1-1/16″ to 6″ with jaw chucks: 6″ with jaw chucks (through spd...