• Romi M-33

    $58,500 - Watertown, CT, USA
    • Manufacturer: Romi

    make: romi model: m-33 24" 3-jaw chuck fanuc 21it cnc control swing over bed: 33.46" cutting diameter: 18.7" x-axis travel: 18.7" z-axis travel: 80" center distance: 80" spindle speed: 5 - 750 rpm ...

  • 2012 CHEVALIER FBL-360B CNC LATHE TK-20550

    $79,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Chevalier
    • Distance between Centers: 40.1”

    spindle nose: a2-11 spindle bore diameter: 4.1” maximum spindle speed: 2500 rpm bar capacity: 4.5” chuck size: 15” spindle motor: 35 hp transmission: 2-speed gearbox maximum torque: 933 nm @ 250 rp...

  • 2010 SUMMIT 26-6X120 CNC LATHE GP-20508

    $74,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Summit

    spindle bore: 6.1″ spindle nosse: a2-11 spindle speed ranges (3): 11 – 1000 rpm cross slide travel: 16” longitudinal travel: 110” z-axis feed rate: 0-196 ipm x-axis feed rate: 0-196 ipm tailstock q...

  • 1998 TRAK TRL-1440P CNC/MANUAL LATHE HB-20562

    $11,500 - Bethlehem, PA, USA Recently Added
      • Distance between Centers: 40”

      width: 10” height: 10-1/4” spindle nose: d1-5 (camlock) spindle through hole: 1-5/8” spindle taper: 1° 29’ 15” taper in reduction sleeve: 4 mt spindle diameter at front bearing: 2.76” spindle speed...

    • 1993 RYAZAN 41” x 197” CNC Flat Bed Lathe

      $99,500 - Houston, TX, USA
      • Manufacturer: RYAZAN

      41” x 197” ryazan cnc flat bed lathe model rt755f3. fanuc 0-t control with heidenhain scale feedback 8 station indexing turret, powered tailstock travel new in 1993. serial no. rt755f3-577-1. stock...

    • 2006 Okuma Multus B300-W 5 Axis Cnc Turning Center

      No price - Warren, MI, USA
      • Manufacturer: Okuma

      condition info: good

    • 2000 TOPPER TNL-100A CNC LATHE HB-20430IP

      $21,500 - Bethlehem, PA, USA
      • Manufacturer: TOPPER
      • Spindle Bore: 2.4”
      • Spindle Nose: A2-6

      motor: 20 hp dimensions: 144” lr x 56” fb x 68” h weight: 7,770 lbs fanuc o-tb control 5c collet chuck topper bf-1200 barfeeder chip conveyor parts conveyor tailstock since we are acting as a broke...

    • 1996 HARDINGE CONQUEST T42 CNC LATHE CK-20091

      $22,000 - Bethlehem, PA, USA
      • Manufacturer: Hardinge

      standard: 10 hp torque rating: 42 ft-lb speed range (1-rpm steps): 50 to 5,000 rpm swing diameter over upper way cover: 21.2″ preloaded ball screw diameter: 1.259″ maximum x-axis travel: 5.31″ x-ax...

    • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

      $24,500 - Bethlehem, PA, USA
      • Manufacturer: Milltronics

      spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

    • MAG VTC-1600 5 Axis Adjustable Rail CNC VTL

      No price - Wixom, MI, USA
      • Manufacturer: MAG

      max swing: 78.7" max facing capacity: 78.7" max under rail: 78.7" ram travel: z axis-49.2" x axis-47.4 diameter of table: 63" max table load: 33,000 pounds table speed: 1-400 rpm equipped with: 2-p...