• 5/16" MORONI MB-764 COLD HEADER

    • Manufacturer: MB
    • Weight: 15,500 LBS

    motor: 25 hp (18.5kw) | pko stroke: 3/4" (20mm) | production: 230 ppm variable | number of dies: 4 | approximate weight: 15,500 lbs | maximum bolt length: 2-1/4" (60mm) | maximum blank length: 3-1/8" (80mm) | ma...

    No price
    Ivyland, PA, USA
  • 5/16 NATIONAL 56 2 DIE 3 BLOW COLD HEADER

    • Manufacturer: National

      equipped with: trim, pko & rko electrical specs: 440 v / 3/60 | maximum diameter: 5/16" | maximum 1st die ko: 4-1/2" | maximum 2nd die ko: 2-1/2" | maximum production: 150 ppm | maximum cutoff length: 3"

      No price
      Ivyland, PA, USA
    • 1/4" NAKASHIMADA PF-630 2 DIE 3 BLOW COLD HEADER

      • Manufacturer: NAKASHIMADA
      • Weight: 11,000 LBS

      equipped with: pko approx. size: 11'l x 5'w x 6'6"h | approx. weight: 11,000 lbs | production speed: 50 - 170 | max. cutoff length: 1.575" | max. cutoff diameter: 1/4"

      No price
      Ivyland, PA, USA
    • 7/64" NAKASHIMADA MF-220 2 DIE 3 BLOW COLD HEADER

      • Manufacturer: PPM
      • Weight: 5,000 LBS (2,300 KGS)

      equipped with: bush co pko in all punches dual plane wire straightener oil micro separator vari speed drive dm monitor end of coil shut off

      No price
      Ivyland, PA, USA
    • 5/16" WATERBURY RAYCARL 2 DIE 3 BLOW HEADER

      • Manufacturer: Waterbury
      • Capacity: 45 TONS
      • Weight: 13,000 LBS

      5/16" waterbury raycarl 2 die 3 blow cold header maximum cutoff diameter: 5/16" maximum cutoff length: 2-1/2" maximum shank length: 2-1/2" maximum production: 100 to 175 ppm heading capacity: 45 tons approx. weig...

      No price
      Ivyland, PA, USA
    • 7/64" NAKASHIMADA PF-210 2 DIE 3 BLOW COLD HEADER

      • Manufacturer: PPM
      • Weight: 2,500 LBS.

      equipped with: reconditioned by nakashimada 2010 dead point monitor double knife co pko 2nd & 3rd

      No price
      Ivyland, PA, USA
    • SACMA Mdl# SP25 4D PROGRESSIVE HEADER

        • Weight: 23,000 Lbs.

        sacma model sp25 4d progressive header, serial no. 39an79, built 1977 specifications: 1/2" cutoff diameter 4" blank length 5 1/8" cutoff length 125 pieces per minute equipped with: bushing cutoff, pko and strai...

        No price
        Newark, NJ, USA
      • 5/16" NATIONAL MODEL 56 2-DIE 3-BLOW COLD HEADER

        • Manufacturer: National

          equipped with: trim pko die relief electrics: 440 v / 3 /60 | maximum diameter: 5/16" | maximum 1st die ko: 4-1/2" | maximum 2nd die ko: 2-1/2" | maximum production: 150 ppm | maximum cutoff length: 3"

          No price
          Ivyland, PA, USA
        • 5/16" NAKASHIMADA PF-860 2 DIE 3 BLOW COLD HEADER

          • Manufacturer: PPM
          • Weight: 22,100 LBS

          equipped with: pko 2nd & 3rd punches approx. weight: 22,100 lbs | production speed: 50 - 120 ppm | 1st die k.o. stroke: 4.528" (115mm) | 2nd die k.o. stroke: 2.363" (60mm) | 2nd punch k.o. stroke: 1.182" (30mm) |...

          No price
          Ivyland, PA, USA
        • PELTZER & EHERLS MODEL# GB-20-4, 4 DIE, 5 STATION BOLTMASTER

            • Capacity: 2000 KN
            • Weight: 66,000 LBS.

            max wire stock dia. ............... 20mm max cut off length ................ 155mm die knock-out stroke max .......... 135mm punch knock out stroke max ........ 22mm machine capacity .................. 2000 kn ...

            No price
            Newark, NJ, USA