• 1000 Tons 165.0 Oz. Shot Van Dorn Injection Molder #ZP61936

    No price - Midwest, WY

      used 1000 ton van dorn 165 ounce shot injection molder. new 1994, but electronic upgraded in 1997. model #1000 h rs, with 73″ x 65″ platen size, 52″ x 45″ tie bar clearance. unit is equipped wit...

    • 1000 Tons 140 Oz. Shot HPM Injection Molder #ZP60446

      No price - Iowa, USA

        used 1000 ton hpm injection molder, new 1969. has maximum 140 ounce shot (general purpose styrene), 254.5 cubic inches. platen size is 60″x60″, maximum mold space 60″x39″, tie rod clearance 39.5″...

      • 2010 HUS 270

        $33,585 - Russia
        • Manufacturer: HUS
        • Screw Diameter: 55 mm
        • Clamping Force: 270 T

        model thermoplastic hus 270 tons. year: 2010 year. hours: 17 000 cycles !!! clamping force: 270 tons injection volume: 635 cc. clearance between columns: 580h580 mm. engine: 22 kw weight: 8.5 tons.

      • 2013 Triulzi 320 ton

        No price - Turkey
        • Manufacturer: Triulzi
        • Screw Diameter: 80 mm
        • Clamping Force: 320 T

        revised in 2013 power in tons:320 dist. x between tie bars:600 dist. x between tie bars:600 screw diameter:80

      • 1100 Tons 83.9 Oz. Shot Engel Injection Molder #UP5972

        No price - EU
        • Manufacturer: Engel

        used injection molder by engel type es 4.400/1.000 with controller cc 90. machine has clamping force 10000 kn / 1100 us tons. distance between tie bars 1100 mm x 1100 mm. mould height in range 400 ...

      • 880 Tons 84 Oz. Shot Engel Injection Molder #ZP61445

        No price - Augsburg, Germany
        • Manufacturer: Engel

        used 880 ton engel injection molder model: es4.550-800 controller: cc100 year: 1998 technical data clamping force: 880 tons distance between tie bars: 1090 x 1000 mm mold height: 650 mm openi...

      • 880 Tons 84 Oz. Shot Engel Injection Molder #ZP61444

        No price - Augsburg, Germany
        • Manufacturer: Engel

        used 880 ton engel injection molder model: es4.550-800 controller: cc100 year: 1998 technical data clamping force: 880 tons distance between tie bars: 1090 x 1000 mm mold height: 650 mm openi...

      • 800 Tons 83.8 Oz. Shot Engel Injection Molder #UP5980

        No price - EU
        • Manufacturer: Engel

        used injection molder by engel type es 4.550-800 with controller cc 100. machine has clamping force 8000 kn / 880 us tons. distance between tie bars 1090 mm x 1000 mm. minimal mould height 650 mm. ...

      • 2000 Engel HL ES 330H 80W

        No price - United Kingdom Recently Added
        • Manufacturer: Engel
        • Screw Diameter: 30 mm
        • Clamping Force: 125 T

        clamp force: 125 shot weight: 103 distance between tie bars: tiebar less make / model : engel hl euromap : es 330h 80w year of manufacture : 2000 clamping force : 125 ton screw diameter : 30 mm sho...

      • 2001 Negri Bossi V 270 1450

        No price - Italy
        • Manufacturer: Negri Bossi
        • Screw Diameter: 60 mm
        • Clamping Force: 270 T

        clamping force - 270 ton injection volume - gr / ps 760 screw diameter - 60 mm pressure on the material - bar 1700 thick mold: 280 mm min 700 max opening stroke: 600 mm columns passage h-v: 630 x 5...