• 1-3/4" PINES #1 TUBE BENDER & PIPE BENDER

    No price - Elk Grove Village, IL
    • Manufacturer: Pines

    1-3/4" pines #1 tube bender & pipe bender hydraulic capacities: ips extra heavy pipe: 1" non-ferrous tubing: y.p. to 25,000 psi-1-3/4" o.d. x .120" wall steel tubing: y.p. to 40,000 psi-1-3/4" o.d....

  • 1-3/4" PINES TUBE BENDER & PIPE BENDER

    No price - Elk Grove Village, IL
    • Manufacturer: Pines

    used 1-3/4" pines tube bender & pipe bender model no. 1 hydraulic counter-clockwise rotation capacities: ips extra heavy pipe: 1" non-ferrous tubing: y.p. to 25,000 psi-1-3/4" o.d. x .120" wall ste...

  • Pines 5T Vertical Hydraulic Tube Bender

    No price - Milwaukee, WI
    • Manufacturer: Pines

    pines 5t vertical hydraulic tube bender serial ............................... 44362-86105 model ................................ 5t
new in ............................... 1986 capacity tubing:
non...

  • 3" Adaptive Motion EB-76 EPA CNC Tube Bender with Electric Push Assist

    No price - Milwaukee, WI

      pre owned adaptive motion eb-76 epa cnc tube bender with electric push assist new in 2006 general specifications max tube length over mandrel             15’ max bend arm travel                195 ...

    • STEMA / PEDAX STEELMASTER UNIMATIC 18XV STIRRUP BENDER

      No price - United States
      • Manufacturer: STEELMASTER

      equipped with dimensions and weight 0"x 0"x 0" 0mm x 0mm x 0mm 0 0 kg

    • 1998 3.25" Hines Model 300NC CNC Tube Bender

      No price - Elk Grove Village, IL
      • Manufacturer: Hines
      • Capacity: 3 1/2" O.D. x .250 Wall

      3 1/2" o.d. x .250 wall capacity: 3 1/2" o.d. x .250 wall | bend arm speed: 3.5 rpm | main motor drive: 20 hp | maximum bend angle: 190 degrees | operating pressure: 2000 psi | bend angle accuracy:...

    • 2012 6" HMT CHIAO SHENG Model A150TNCB PLC Controlled Tube Bender

      No price - Elk Grove Village, IL
      • Manufacturer: HMT CHIAO SHENG

      6" x 1/4", 236" max length, plc controls round bar: 2 3/4" | round tube: .5" | max pipe od: 6" x 1/4" | square tube: 4 x 1/4" | equipped with: plc control | working height: 59" | max bending angle:...

    • LUBOW ML-200 2-STOP TABLE BENDER

      No price - Ivyland, PA
      • Manufacturer: LUBOW
      • Capacity: 8 PIECES - 1/4" WIRE 5 PIECES - 3/8" WIRE

      equipped with: two different pre-selectable angles infinitely adjustable bending post position foot pedal air/hydraulic operation

    • 2" Conrac Leonard Model 162 Hydraulic Tube Bender

      No price - Elk Grove Village, IL
      • Manufacturer: Conrac Leonard
      • Capacity: 1 1/2 IPS x Schedule 40 Max

      rebuilt and retrofitted by turnkey resources clamping: drop away and direct acting hydraulically, operated pressure dies | indexing: 10 stop - 3 axis | bend angle: 185 deg max | bend radius: 10" | ...

    • LUBOW #4-SAB FOUR HEAD FRAME BENDER

      No price - Newark, NJ

        - can make 1,2,3 or 4 bends per cycle - up to 40.000 bends per hour using 1/8" - angle of each bend can be individually adjusted - can bend different radios - bends angles from 0 to 225 degrees wi...