Used applicators in Hamburg, Germany

500 liter rectangular IBC container, Aisi 304

remarks: Frame, Fe (galvanized); Manhole diameter approx. 460 mm; The outlets are probably all of the same diameter

Toshiba PVG-601V 5.0 – 7.0 MHz // Endovaginal Vaginal Probe Sample

• Manufacturer: Toshiba

Transvaginal 5.0 – 7.0 MHz Fully functional In good used condition Item location: Hamburg Transvaginal 5.0 – 7.0 MHz Fully functional In good used condition Item location: Hamburg Transvaginal 5.0 – 7.0 MHz Fully...

GE SP10-16 Linear Probe for VOLUSON 730 Systems

4.5 – 16.5 MHz Suitable for the following models: Voluson 730 PRO, VOLUSON 730 Expert Fully functional In good used condition Item location: Hamburg 4.5 – 16.5 MHz Suitable for the following models: Voluson 730 P...

Toshiba PVT-575MV PVT 575 MV probe 3D – 4D probe

• Manufacturer: Toshiba
• Model: PVT-575MV

3D/4D curved array Frequency band 3.0 to 7.0 MHz. Compatible with: Toshiba Xario (SSA-660A), Toshiba Xario XG (SSA-680A, ...

Aloka Convex 2.5 – 6.0 MHz UST-978-3.5 Abdomen Obstetrics

• Manufacturer: Hitachi Aloka

Convex 2.5 – 6.0 MHz In very good, well-maintained condition Item location: Hamburg Convex 2.5 – 6.0 MHz In very good, well-maintained condition Item location: Hamburg Designation: UST 978-3.5 Convex 2.5 – 6.0 MH...

Hitachi EUP-L33 Linear 7.5 – 5.0 MHz

• Manufacturer: Hitachi

Linear Probe 7.5 – 5 MHz In very good, well-maintained condition Item location: Hamburg Fully functional In good used condition Item location: Hamburg Linear Probe 7.5 – 5 MHz In very good, well-maintained condit...

1000 liter conical container Bohle MC 1000, Aisi 304

• Manufacturer: LB Bohle

remarks: Container stands loose in a 4-foot frame, Aisin 304; cone height approx. 600 mm; manhole diameter approx. 620 mm; container with smaller dents

221 liter heatable/coolable stainless steel 316 vessel

max. allowable working temperature: 95 °C max. allowable working overpressure (dj): 1.8 bar max. allowable working temperature (dj): 140 °C Temperature control cylinder (dj): thermoplate remarks: 3 stainless stee...

300 liter mobile tank, Aisi 316

remarks: Name plate missing: excess pressure most likely +3 Bar; filling pipe inside the tank (see pictures); outlet slightly different (see pictures)

2500 liter oval storage tank, Aisi 304

remarks: 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack Tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valve...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Gempp & Unold AG

remarks: Frame, Fe (galvanized); diameter of manhole approx. 415 mm (screws for fastening the manhole cover made of Fe (galvanized))

500 liter pressure tank, Aisi 304

• Manufacturer: Duotank

remarks: Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover)

300 liter agitator tank (powder mixer), Aisi 316 with propeller agitator

remarks: Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside

1500 liter bulk container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame made of AISI304/316; Manhole diameter approx. 455 mm; At the end of the cone there is 1 opening with a diameter of approx. 600 mm (closure for this opening is missing)

800 Liter IBC-container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame Fe (galvanized; lacquered); according to the manufacturer, ADR test papers are available and, if required, can be requested there using the serial number