• MAZAK INTEGREX 200-3ST 640MT 62581

    • Manufacturer: Mazak
    • Spindle Bore: 99"
    • Spindle Nose: A2-6

    2004 mazak integrex 200-3st multi axis cnc turning center specifications: maximum swing........................... 26" maximum swing over carriage............. 19.7" - 26" note: depends upon workpiece length,tool...

    No price
    Huntington, NY, USA
  • 2004 Mazak Integrex 300 27800

    • Manufacturer: Mazak
    • Spindle Bore: 3.46"
    • Spindle Nose: A2-8

    second spindle specifications (r) mazatrol fusion 640mt pro cnc performance cnc optional pkg rs-232c/3.5" floppy disc drive pcmcia i/f (2-slot, card bus) network interface (for lan & modem) (2) 12" hydraulic chuc...

    No price
    Melville, NY, USA
  • YAMA SEIKI GA-3300 CNC TURNING CENTER

    • Manufacturer: Alpha

      yama seiki ga-3300 cnc turning center new 2012 equipped with fanuc oi-td cnc control with 8.4″ color lcd ac 30 hp (30 min.) fanuc alpha p40i spindle motor 2-speed motor configuration 12″ hollow 3-jaw hydraulic ch...

      No price
      Bannockburn, IL, USA
    • 2008 Okuma Multas B300W 27948

      • Manufacturer: Okuma
      • Spindle Bore: 3"

      this machine was used as a demo machine until 2012 osp-p200l cnc control 12" chuck main spindle b-axis swiveling milling spindle 40-station automatic tool changer (c) axis synchronize function (c) axis auto zero ...

      No price
      Melville, NY, USA
    • 2002 Emco Hyperturn 690MC Plus 5553

      • Manufacturer: Emco
      • Spindle Bore: 4.200
      • Spindle Nose: A2-8

      c-axis: yes | x-travel: 19.30 | z-travel: 41.54 | chuck size: 12.00 | bar capacity: 3.740 | spindle bore: 4.200 | spindle nose: a2-8 | spindle motor: 72 | spindle speed: 3,200 | rapid traverse: 1181 | tool posit...

      No price
      Maitland, FL, USA
    • 2002 Mazak Integrex 200-IISY 6042

      • Manufacturer: Mazak
      • Spindle Bore: 2.990
      • Spindle Nose: A2-6

      b-axis: yes | c-axis: yes | y-axis: yes | x-travel: 22.83 | z-travel: 41.10 | chuck size: 10.00 | chuck type: hydraulic | bar capacity: 2.500 | spindle bore: 2.990 | spindle nose: a2-6 | single turret: yes | spi...

      No price
      Maitland, FL, USA
    • ACRA ATS-27 EVS #3040

      • Manufacturer: Acra

        new acra  9" x 15" super precision second operation lathe model: ats-27 evs series: 27 features: swing over bed: 9” spindle rpm: 0-4000 rpm spindle nose: 5c (10") / 4" x taper main motor: 3 hp voltage: 220v ac / ...

        No price
        Baltimore, MD, USA
      • ACRA ATL 27 EVS #3041

        • Manufacturer: Acra

          acra atl 27 evs second operation toolmakers lathe model: atl 27 evs series: 27 features: swing over bed: 9” spindle rpm: 0-4000 rpm spindle nose: 5c (10") / 4" x taper main motor: 3 hp voltage: 220 v ac / 1 ph / ...

          No price
          Baltimore, MD, USA
        • 2004 Traub TNL26K (TNL32K), TX8i CNC, Bar Feed

          • Manufacturer: Traub
          • Capacity: 50L / Min.
          • Weight: 8800 Lbs.

          (1) used traub cnc swiss lathe, model tnl26k (tnl32k), new 2004 drive power (100%/40%)6.7/10/7 kw drive power (100%/40%)6.7/10/7 kw tx8i cnc control hinge type chip conveyor fmb turbo 5-42 magazine type barfeed 1...

          No price
          Chicago, IL, USA
        • 1986 4" BARDONS & OLIVER MODEL 34 AUTOMATIC CUTOFF LATHE 14983

          • Manufacturer: Oliver

            age? stock stop max. length cut with standard bar 33" weight shown below is without magazine bar feed 20' magazine type stock feeder automatic stock feed tables, air operated, chain drive 2 independent side slide...

            No price
            Des Plaines, IL, USA

          Have 5 seconds to help us improve the results?

          I'll do it
          No thanks