• 1993 Hardinge GT-27 CNC Gang Style Turning Center w 6' Harmatic Bar Feed 3215

    No price - Plymouth, MN, USA
    • Manufacturer: Hardinge
    • Spindle Bore: 1-1/16" Collet Capacity

    ge fanuc 18t cnc control, 5c collet closer, parts chute, gt gang tool plate, assorted gang tool holders, high pressure coolant system, filtermist mist collector, harmatic 6' bar feed.

  • 1996 0.75" X 12' Spego Model 123-6Z Turnamic Hydrodynamic Bar Feed System

    No price - Elk Grove Village, IL, USA
    • Manufacturer: Spego

    this spego 123 - 6z turnamic bar feed is available for your inspection in the continental usa.

  • 1997 0.787" X 12' Iemca Model CH-220-37 Magazine Type Bar Feed System

    No price - Elk Grove Village, IL, USA
    • Manufacturer: Iemca

    see this iemca ch220-37 bar feed system with automatic magazine loader in operation on a us manufacturer's plant floor.

  • 2006 3.125" Dia. 4' Length ft FMB SL-80S BAR FEED

    $5,950 - Harrison, NJ, USA
    • Manufacturer: FMB
    • Capacity: .393" - 3.125" (10mm - 80mm)
    • Weight: 100 lbs.

    fmb sl-80s magazine barfeed new: 2006 general specifications as per brochure: bar diameter capacity: .393" - 3.125" (10mm - 80mm) up to 50" long material power consumption: 1.5kw insertion speed: 0...

  • 1995 (2) LNS Super Hydro bar Bar Feed Super Hydro bar HYS 6.65 HS-5.2 #3370

    $4,900 - Minnesota, United States
    • Manufacturer: LNS

    asset description notes: model: super hydro bar hys 6.65 hs-5.2 two (2) available general specifications: max length of bar stock 12' no. of aluminum guide tubes 6 2.638" hole for 2 1/4" - 2 1/2" ...

  • 1998 LNS Model Quick Load Servo Bar Feed

    No price - Elk Grove Village, IL, USA
    • Manufacturer: LNS
    • Capacity: 36"

    equipped with: pendant control, (3) identical units available. removed from a mori seiki sl-150 | maximum bar length: 63" | minimum bar length: 5" | maximum bar diameter: 4.75" | minimum bar diame...

  • 1997 Daewoo Puma 8S, Mitsubishi 520L, 8" Chuck, 14" Dia. x 14" Length, Bar Feed

    No price - Chicago, IL, USA
    • Manufacturer: Daewoo
    • Spindle Bore: 2.44"
    • Distance between Centers: 14.6"

    (1) used daewoo "puma" cnc turning center, model 8s, new 1997 mitsubishi 520l cnc controller 8" kitagawa 3-jaw power chuck ats s20 collet chuck smw spacesaver bar feed turbo chip conveyor pms barpu...

  • B-274: Nordson Colormax 2 Powder Booth System New in 2014, 4' wide x 6'-6" high

    No price - Berlin, WI, USA Recently Added
    • Manufacturer: Nordson

    b-274: nordson colormax 2 powder booth system new in 2014 type of system: cyclone, side-draft reclaim powder booth profile opening: 4’-0” wide x 6’-6” high (can be modified) plant utilities: electr...

  • 2007 Haas SL-10 CNC Lathe w/ Bar Feed, Tailstock, & Presetter

    No price - Elk Grove Village, IL, USA
    • Manufacturer: Haas
    • Model: SL-10
    • Spindle Bore: 2.31"
    • Spindle Nose: A2-5

    equipped with: haas bar feed, tailstock, parts catcher, tool presetter, chip conveyor, spindle orientation, intuitive programming system, manual

  • 1993 10" x 10"Kasto SSB260VA,Full Automatic,Indexable Feed,Nesting,16'Bar Feed, #39197

    No price - Lincolnshire, IL, USA
    • Manufacturer: Kasto
    • Weight: 8,000 Lbs.

    serial no. 6510 113 458 new - 1993 specifications: equipped with: fully enclosed cutting area kasto compact controller front & rear "bundle cutting" hydraulic vises 16' kasto infeed conveyor system...