• NIKKEN 5 AXIS TRUNNION ROTARY TABLE

    No price - Altamonte Springs, FL, USA
    • Manufacturer: Nikken

    nikkei kosakusho works. serial no. 8016 date: 99.8 120y a7 spindle speed 8000. alpha controller v7.

  • CR Onsrud Model 148E24 "Extreme Series" CNC ROUTER (2014)

    No price - Altamonte Springs, FL, USA
    • Manufacturer: C.R. Onsrud

    2014 cr onsrud model 148e24 "extreme series" cnc router specifications: f.e.a. heavy weldment fixed bridge & vertical supports, thermal heat treated, stress relieved, & normalized one-piece, steel ...

  • Nikken 5AX-200II Tilting Rotary Table (2003)

    No price - Altamonte Springs, FL, USA
    • Manufacturer: Nikken

    diameter of table 7.87” diameter of spindle hole 2.4” x 1.97” centre height (90 deg) 7.08” min. increment 0.001 deg

  • Iemca Trilogy 12' Barfeed (2011)

    No price - Altamonte Springs, FL, USA
    • Manufacturer: Iemca

    12' length email or call for quote

  • Almco Tumbler Model OR-10V

    No price - Altamonte Springs, FL, USA

      almco tumbler type: tumbler make: almco model # or-10v specifications of bowl working capacity (ft3) 8.1 channel cross section 12.5" vibrations per minute 1400 drive motor hp 5 length (in) 69 width...

    • Iemca VIP 80 E–II Barfeed (2010)

      No price - Altamonte Springs, FL, USA
      • Manufacturer: Iemca

      bar diameter capacity 5mm to 80mm (.197” to 3.150”) bar length capacity lathe spindle length maximum bar length 63.5” minimum bar length 8.3” magazine capacity 25.6 linear inches bar pusher 1 12mm ...

    • Haas Servo Bar 300 Auto Barfeed(1999)

      No price - Altamonte Springs, FL, USA
      • Manufacturer: Haas

      • wide capacity range up to 3 1/8" (79 mm) • precision servo ballscrew drive system • simple setup • easy interface to haas cnc control • accuracy of ±0.005" feed length without deadstop • accepts ...

    • Iemca Boss 547/37 12’ Barfeed (2003)

      No price - Altamonte Springs, FL, USA
      • Manufacturer: Iemca

      iemca boss 547/37 6’ barfeed (2003) bar length: 12 ' there is a total of (4) channel sets –one channel set of each of the following sizes: 26 mm, 28 mm, 43mm, and 36 mm

    • Iemca Master 80HF 12’ Barfeed (2011)

      No price - Altamonte Springs, FL, USA
      • Manufacturer: Iemca

      max bar diameter with remnant retraction 3.15” min bar diameter (mm) 15 for steel, 20 for different materials 8 changing the guide channel machinable bar range in one channel (mm) 65 for steel, 60 ...

    • Iemca VIP 80 E – II Barfeed (2007)

      No price - Altamonte Springs, FL, USA
      • Manufacturer: Iemca

      3.1” capacity approx. 6' length purchased new in 2007