Used barfeeder

- 184 listings found
Sort by Price: Low to High | High to Low
  • 2001 LNS Quick Load Servo S2 Barfeeder

    • Manufacturer: LNS

      Barstock diameter: 1/4 - 4-3/4" barstock length: 5"-63" max. weight per bar cannot exceed: 150 lbs electrics: 220v/3 phase dim (approx): 59" x 70" weight (approx): 800 lbs equipped with (subject to buyer verifica...

      No price
      Altamonte Springs, FL, USA
    • IEMCA Mini-Boss 332 12' BArfeeder (2011)

      • Manufacturer: Iemca

        Bar size capacity 3mm(1/8") - 37mm (1.457") bar length capacity 12' is standard, 10', 14', and 20' available maximum bar length 12' 4" minimum bar length 39" magazine capacity 11 linear inches maximum remnant len...

        No price
        Altamonte Springs, FL, USA
      • 2012 Doosan Lynx 220A

        • Manufacturer: Doosan
        • Weight: 7,190 LBS

        Lns alpha sl-65 s barfeeder chip conveyor tailstock 6" 3-jaw chuck parts catcher tool pre-setter all available manuals

        No price
        Schaumburg, IL, USA
      • 2016 Cubic GTM-42D 6434

        • Manufacturer: LNS
        • Spindle Bore: 2.200
        • Spindle Nose: A2-5

        y-axis: yes | x-travel: 8.86 | z-travel: 9.25 | bar capacity: 1.650 | spindle bore: 2.200 | spindle nose: a2-5 | spindle motor: 10 | spindle speed: 4,000 | rapid traverse: 590 | live milling hp: 2 | control make...

        No price
        Maitland, FL, USA
      • 1995 Traub TNC30 DGY Twin Spindle Twin Turret Live Tooling with Y Axis Lathe

        • Manufacturer: Traub

          Traub tnc30 dgy twin spindle twin turret live tooling with y axis lathe specifications for traub tnc30 dgy: y axis bar capacity:1.18" both spindles, with upper and lower turrret barfeeder: traub stamag dn26 or ln...

          $26,900 (USD)
          Sanford, FL, USA
        • 2012 Citizen M32 III 6072

          • Manufacturer: Citizen

            c-axis: yes | chuck type: collet | bar capacity: 1.250 | single turret: yes | spindle motor: 10 | spindle speed: 8,000 | rapid traverse: 1259 | tool positions: 10 | total spindles: 2 | turret options: (5) turnin...

            No price
            Maitland, FL, USA
          • 6" chuck Hardinge Model Conquest T42 2 Axis CNC Lathe

            • Manufacturer: Hardinge
            • Spindle Nose: A2-5

            equipped with: ge fanuc 18t cnc control, turbo chip conveyor, parts catcher, tailstock, pietro cucchi barfeeder | spindle speeds: 5,000 rpm | turret positions: 12 | swing over bed ways: 21.2" | maximum turnin...

            No price
            Elk Grove Village, IL, USA
          • 6" chuck Hardinge Model CHNC II CNC Turning Center

            • Manufacturer: Hardinge

              Collet closing attachment, general numeric fanuc 10t cnc conbtrol

              No price
              Elk Grove Village, IL, USA
            • 2015 Haas ST-30 32 BIT

              • Manufacturer: Haas
              • Spindle Bore: A2-6" / 3.5"
              • Spindle Nose: A2-6" / 3.5"

              In 2010 haas introduced the new haas st series of lathes.  these haas cnc lathes included the haas st30, which was stanard as a chucker, but was also offered with a tailstock, and the haas st30ss, which was a sup...

              No price
              Dundee, FL, USA
            • Index G200 + barfeeder CNC lathes

              • Manufacturer: Index
              • Spindle Bore: 60 mm

              Subspindle d60: Ø 60 mm - 6000 rpm - max 22kw cross slide 1: 14 driven tools cross slide 2: 14 driven tools index mbl65/3700 barfeeder: Ø 65 mm - length 3000 mm chipconveyor system continuous c-axis on main & sub...

              No price
              Deinze, Belgium