• Warner & Swasey SC32 Slant Bed 2843562

    No price - Washington, PA, USA
    • Manufacturer: Warner & swasey
    • Spindle Bore: 13.00 in 330.2 mm
    • Distance between Centers: 120.00 in 3048 mm

    two speed ranges, new cnc system, new servo motors, new servo and spindle drive, ways reground

  • 2010 Youngstown 50R Flat Bed 551

    No price - Washington, PA, USA
    • Manufacturer: Fanuc
    • Distance between Centers: 162 in 4114.8 mm

    carriage travel with tailstock removed 200 in (5080 mm), new servo motors, servo drives and spindle drive, reground hardened ways, reground ball screws on carriage and cross slide, optional spindle...

  • 2000 FPT M-ARX Bed Sect. 17449

    No price - Melville, NY, USA
    • Manufacturer: FPT

    (from fpt m-arx travelling column cnc floor type hbm) hardened & ground ways precision racks

  • 1980 Warner & Swasey SC-20-120 Slant Bed 2843563

    No price - Washington, PA, USA
    • Manufacturer: Warner & swasey
    • Spindle Bore: 8.38 in 212.85 mm
    • Distance between Centers: 120.00 in 3048 mm

    two spindle speed ranges power: existing | control: siemens 840 cnc or fanuc 18itb | turret 1: 8-station | chuck type: 4-jaw independent | spindle bore: 8.38 in 212.85 mm | spindle nose: a2-15 | sp...

  • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Milltronics

    spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

  • CLEVELAND A5T2 CNC VERTICAL BED MILL

    No price - Cleveland, OH, USA
    • Manufacturer: Cleveland
  • CLEVELAND A3-10H VERTICAL CNC BED MILL

    No price - Cleveland, OH, USA
    • Manufacturer: Cleveland
  • CLEVELAND E8EC CNC VERTICAL BED MILL

    No price - Cleveland, OH, USA
    • Manufacturer: Cleveland
  • 1997 ProtoTRAK DPM3, CNC 3 axis bed mill, AGE III control, 3HP #3552

    $14,900 - Connecticut, United States Recently Added
    • Manufacturer: Southwestern Industries

    asset description notes: prototrak dpm3, 3 axis cnc bed mill. age iii control table 10x50". travels: x-31", y-17", z-23.5". 3.5" floppy. pneumatic power draw bar. remote start/stop auto lube pump. ...

  • 1993 Ravensburg KVH-4 CNC 23052

    No price - Melville, NY, USA
    • Manufacturer: Ravensburg
    • Spindle Bore: 7.87"
    • Distance between Centers: 236.22"

    siemens 880t cnc controls 78.74" diameter face plate chuck 43.34" diameter face plate chuck hydrostatic headstock bearings & guideways modular attachments for: boring, milling turning and id & od g...