• 1996 SICOTTE 700-3 VERTICAL BORING MACHINE [BV-011133]

    $6,800 - United States
    • Manufacturer: SICOTTE

    sicotte airbor 700-3 vertical boring machinecapacity 18" x 36" table. equiped with: -- (4) vertical spindles 1 1/2 diam. with spring collet 1/2" capacity., spindles fully adjustable to entire tab...

  • 2013 SICOTTE T 1050 BORING MACH. (HORIZONTAL) [BV-011131]

    $5,760 - United States
    • Manufacturer: STILL

    sicotte t 1050 horizontal boring machine -- 2-spindle horizontal borerequipped with: -- 2 hp motor timing belt drives with motor starter. -- (2) horizontal spindles 2" diam. with spring collet 1...

  • MCKNIGHT-MILLER 4CM BORING MACH. (HORIZONTAL/VERTICAL) [BV-010033]

    $9,410 - United States
    • Manufacturer: Miller

    12" x 80" material holding area, (2) horizontal + (2) end boring motors with a capacity of 60" between boring unit & 2 vertical from bottom unit with maximum drilling distance between the units of ...

  • 2013 NORTHTECH NT-SDH-10HD BORING MACH. (VERTICAL/HORIZONTAL) [BV-010098]

    $15,000 - United States
    • Manufacturer: NORTHTECH

    northtech nt-sdh-10hd horizontal boring machinemultiple spindle horizontal boring machine equipped with:: â—� (2) 5 hp motors belted to the boring spindles driven at 3,500 rpm. â—� (12) drill s...

  • 1990 ROOT D-170 BORING MACH. (HORIZONTAL) [BV-010050]

    $9,200 - United States
    • Manufacturer: ROOT

    (3) d53 - 2 hp motors, (3) x9bn 2 spindle heads with minimum center 1", maximum centers 3 1/4" to receive 7/16" - 14 thread bit shanks. -- maximum head spacing is 42", minimum hdad spacing is 6". ...

  • 1979 SICOTTE J 3 H-7 VERTICAL BORING MACHINE [BV-010642]

    $8,500 - Canada
    • Manufacturer: SICOTTE

    24" x84" table size (6) 1 hp motors mounted on 24" long arms with timing belt drive to (6) 2" diameter spindle with 0-1/2" capacity (2) spring loaded holddowns. -- 0" - 8" vertical table feed, hyd...

  • SICOTTE J 20-5 BORING MACH. (HORIZONTAL) [BV-010084]

    $5,775 - Canada
    • Manufacturer: SICOTTE

    sicotte j 20-5 horizontal boring machine:12" x 60" steel table with 2-1/2" manual up-and-down adjustment. -- (2) drive groups with 1-1/2 hp - 3,500 rpm drive motor each, timing belt & pulley drive...