- Manufacturer: Haas
- Weight: 165 lbs
Brush type servos torque: 210 ft-lbs | weight: 165 lbs | backlash: 30 arc-sec | gear ratio: 90:1 | max runout: 0.0005" | center height: 6" | speeds (deg/sec): 0.001 to 60
- Manufacturer: Bandit
Brush bandit 250xp, fully reconditioned machine, brand new clutch, fully serviced, only 2200 hours. 100% serviced and work ready.
2007 brush bandit 200xp spec’d out to a 250, 4.5 liter caterpillar turbo diesel engine, fully loaded with a factory winch, shute rotation, shute heigh adjustment only 740 original one owner hours on this machine....
- Manufacturer: White
- Manufacturer: BURRMASTER
419-872-2364 / email@example.com burrmaster #1 brush deburring machine 3" od x 96" max., stock #3375 specifications: - tube length: 6" - 96" (150 mm - 2438 mm) - tube diameter: 3/8" - 3.0" (10 mm - ...
- Manufacturer: Dubois
Very heavey 2head denibor wirer brush machines with vacuum table this maybe a plus on very short small parts
- Manufacturer: Euromac
Euromac model cx1250/30 cnc single station punch, s/n mdc-128-012a, new 2000, 30 ton capacity, 78.7 in. x 49.2 in. work area, cnc control, brush table, 6-station head and single station head, location cincinnati,...
- Manufacturer: Dusphol
Used dusphol model sup-f-500-hteva wrapper. used dusphol model sup-f-500-hteva wrapper.specifications:- 19.3” profile wrapper - s/n 00300367 (new 1997) - 27.5” diameter maximum paper/foil roll size - 15 – 260-fpm...
- Manufacturer: ACS
The heavy-duty vermeer bc1000xl brush chipper with its all-steel engine enclosure is designed to hold up for the long haul. enhanced with the modern day operator in mind, the bc1000xl is available with either a t...
- Manufacturer: Trumpf
- Capacity: 22 Tons
- Weight: 17,600 Lbs
Strokes/minute (marking/rapid beading). 2200 1/min bosch type 3 cnc control 9-station automatic tool changer on x-axis rail programmable tool rotation brush table inspect in plant under power 26,892
Equipped with: hoffman interface (4) 14" wheel brushes support plate & collet automatic door auto clamp & unclamp yasrawa drives (4) 3hp/1760rpm motors dust collector 480/3/60 electrics
- Manufacturer: Barban
This machine was used to clean off flooring before it entered finishing line $13,000 12000
Get email updates for brush machine in Virginia, United States