• OKUMA HOWA 2SP-V55 TWIN SPINDLE CNC VERTICAL TURNING CENTER - Lathe

    No price - Livonia, MI, USA
    • Manufacturer: Okuma

    equipped with fanuc 18t cnc controls, multiple part program storage, rs-232 port, (2) 12-position horizontal turrets, (2) 40 hp spindles, auto lube system, auto doors, hydraulic actuators and draw ...

  • 2000 EMCO MAIER EMCOTURN 345-II CNC LATHE TK-20600

    $22,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Emco
    • Distance between Centers: 20.1”

    speed range: 0 – 6,000 rpm torque of main spindle: 58 ft/lbs spindle nose: a2-5 spindle bore: 2.1” motor: 15 hp turret: 8 stations tool holders: vdi-30 taper: mt #4 dimensions: 105” lr x 72” fb x 8...

  • Daewoo Puma 10HC Turning Center Lathe

    $16,900 - Sanford, FL, USA Recently Added
    • Manufacturer: Daewoo

    daewoo puma 10hc turning center lathe 1996 specifications: fanuc 0-t 10" samchully or kitagawa hyd powerchuck (as new condition never used) collet chuck a2-8 spindle 3" bar capacity 30 hp spindle 1...

  • Super Kia Turn 21L Turning Center Lathe

    $16,900 - Sanford, FL, USA Recently Added
    • Manufacturer: Kia

    super kia turn 21l turning center lathe specifications: max swing 21.3” swing over saddle 13.8” max turning diameter: 13.8” max turning length: 16.1” spindle speeds: 25-4000 rpm spindle drive: 20 h...

  • OKUMA HOWA V55 CNC VERTICAL TURNING CENTER

    No price - Livonia, MI, USA
    • Manufacturer: Okuma

    1999 okuma & howa v55 cnc vertical turning center - lathe vtl equipped with: 18" hydraulic chuck, fanuc 18t cnc control, multiple part program storage, rs-232 port, 12-position horizontal turret, 4...

  • SMS V1000 CNC 4-Axis Vertical Turning Center 79040-0886

    No price - Left Hand, WV, USA
    • Manufacturer: SMS

    turning diameter can be increased to 60 in (1525 mm), spindle diameter 11.25 in (286 mm), spindle nose 15"-a2

  • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Milltronics

    spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

  • Mazak M4-1000

    $9,900 - Watertown, CT, USA Recently Added
    • Manufacturer: Mazak

    make: mazak model: m4-1000 serial: 40527 new in 1982 max swing: 22" max swing overbed: 22" max swing over cross slide: 11" center distance: 38" spindle bore: 3.15" spindle nose: jis a2-8 spindle sp...

  • Graziano SAG 14

    $5,995 - Watertown, CT, USA Recently Added
    • Manufacturer: Graziano
    • Model: SAG 14

    make: graziano model: sag 14 serial: 5624 60" distance between centers 7" swing 11" bed width 2" spindle hole 12 spindle speeds spindle rpm ranges: 40-1500 rpm tail stock morse 4 taper shars 250-30...

  • Milltronics ML24/80

    $49,500 - Watertown, CT, USA Recently Added
    • Manufacturer: Milltronics

    make: milltronics model: ml24/80 controls: centurion 6t series d year: 2002 max swing: 24" max swing over gap: 34.5" gap width: 10" max swing over cross slide: 14.3" 80" between centers max x-axis ...