• Mazak M4-1000

    $9,900 - Watertown, CT, USA Recently Added
    • Manufacturer: Mazak

    make: mazak model: m4-1000 serial: 40527 new in 1982 max swing: 22" max swing overbed: 22" max swing over cross slide: 11" center distance: 38" spindle bore: 3.15" spindle nose: jis a2-8 spindle sp...

  • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Milltronics

    spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

  • 1979 LeBlond 2516 NF Heavy Duty 3NFL-1312

    No price - Washington, PA, USA
    • Manufacturer: Leblond
    • Distance between Centers: 96.00 in 2438.40 mm

    general electric 125 hp variable speed drive, multiplex rpm digital readout, power operated tailstock

  • 1980 Warner & Swasey SC-20-120 Slant Bed 2843563

    No price - Washington, PA, USA
    • Manufacturer: Warner & swasey
    • Spindle Bore: 8.38 in 212.85 mm
    • Distance between Centers: 120.00 in 3048 mm

    two spindle speed ranges power: existing | control: siemens 840 cnc or fanuc 18itb | turret 1: 8-station | chuck type: 4-jaw independent | spindle bore: 8.38 in 212.85 mm | spindle nose: a2-15 | sp...

  • 1960 Cincinnati Hydrashift LRT 15 1W3H6H-39

    No price - Washington, PA, USA
    • Manufacturer: Cincinnati
    • Spindle Bore: 1.75 in 44.45 mm
    • Distance between Centers: 60.00 in 1524 mm

    steady rest, taper attachment ways: flame hardened and ground | power: existing | weight: 3500 lbs 1587.57 kg | chuck type: 4-jaw independent | spindle bore: 1.75 in 44.45 mm | spindle nose: l-1 | ...

  • 2000 LeBlond 50/30 Raised 4625 NK Tape Turn I – Flat Bed 2NK506

    No price - Washington, PA, USA
    • Manufacturer: Leblond
    • Spindle Bore: 3.06 in, 77.777 mm
    • Distance between Centers: 180.00 in, 4572.00 mm

    press-in center-in chuck, feedrate range .1 to 150 inches per minute, tailstock quill travel 18 in (457.2 mm), carriage length on ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick change sli...

  • 1968 Monarch 4025 48945-NC

    No price - Washington, PA, USA
    • Manufacturer: Monarch
    • Distance between Centers: 132.00 in 3352.80 mm
    • Spindle Nose: D-1

    steady rest, customer choice of chuck diameter ways: hardened and ground | power: 3 ph / 60 hz / 220-440 v existing | weight: 41560.00 lbs 18851.28 kg | control: fagor 8025/30 (recently retrofitted...

  • American Pacemaker 75158-56

    No price - Washington, PA, USA
    • Manufacturer: American
    • Spindle Bore: 2.81 in 71.37 mm
    • Distance between Centers: 154.00 in 3911.60 mm

    taper attachment, heavy duty steady rest with 16 1/2 in (415 mm) capacity, ways reground, carriage re-scraped, tailstock aligned

  • 1960 Cincinnati 18” Tray Top with Gap 2W4U5E-13

    No price - Washington, PA, USA
    • Manufacturer: Cincinnati
    • Spindle Bore: 1.75 in 44.45 mm
    • Distance between Centers: 108.00 / 120.00 in 2743.00 / 3045.00 mm

    steady rest, full length hydraulic, scanamatic tracer

  • 1970 Herkules WDK600 5578574

    No price - Washington, PA, USA
    • Manufacturer: Herkules
    • Distance between Centers: 250.00 in 6350 mm
    • Spindle Nose: 1.25 - 100 Rpm, 4 Ranges, Infinitely Variable

    two turning saddles, monoblock construction with four guideways (two for carriage, and two for tailstock), bed width 63 inches (1600 mm), 24 ton tailstock force gauge, steady rest (roller type), ma...