• 2006 10″ Troyke DL-10-B 4th-Axis CNC Rotary Table

        interface cables fanuc ac servo motor size: 10″

        No price
        Spencer, MA, USA
      • 12″ Tsudakoma Vertical Upper Side Motor Mounted Type CNC Rotary Table RNCK-301

            net weight: 485 lbs. | turntable diameter: 12.5″ | center bore diameter: 1.5″ | table rotation speed: 44.1 rpm | speed reduction ratio: 1/180 | load capacity, vertical: 330 lbs. | table gyration angle per 1 puls...

            No price
            Spencer, MA, USA
          • Z. Bavelloni 315-4 Egar CNC Stone/Marble/Granite Machining Center w/ Tooling

            • Manufacturer: Stone

              z. bavelloni egar 315-4 cnc router work center w/ controls & accessories 33kw this item is used; untested. in good condition.5' x 10' ...

              $65,000 (USD)
              Fleetwood, PA, USA
            • 2007 NTC CNC Horz. Machining Center ZH4000

              • Manufacturer: Rapid
              • Spindle Taper: #40CT
              • Control: Fanuc 32i

              control: fanuc 32i | motor hp: 25 hp | pallet size: 15.7" | spindle taper: #40ct | x axis travel: 25" | y axis travel: 22" | z axis travel: 22" | no. of pallets: 2 | rapid traverse: rapid traverse rate: x,y,z 2,...

              $59,500 (USD)
              Elk River, MN, USA
            • 1995 Mazak CNC Vert Machining Center w/ Dual Pallet Shuttle MTV-655/80

              • Manufacturer: Mazak
              • Spindle Taper: CT#50
              • Control: Mazatrol M-32

              control: mazatrol m-32 | comments: offered as is where is | table size: (2) 25.5" x 88" pallets with side address pallet changer | spindle taper: ct#50 | x axis travel: 78.7" | y axis travel: 25.6" | z axis trav...

              $19,500 (USD)
              Elk River, MN, USA
            • Used 2012 TOS Varnsdorf WHN 15 CNC Horizontal Table Type Borer #161097

              • Manufacturer: TOS Varnsdorf

                spindle travel - w axis: 900 mm travel x-axis: 3500 mm control system: heidenhain tnc 530 travel y-axis: 2500 mm spindle speed: 3000 /min. spindle taper: cat 50 diameter of working spindle: 150 mm max. loa...

                No price
                Ohio, United States
              • KENT USA KLS-1220N CNC ECONOMY LATHE

                • Manufacturer: Kent

                  kent usa kls-1220n cnc economy lathe – new product features 12” swing, 19.6” between centers fanuc 0i-mate td with manual guide-i servo motor on x and z axis frequency drive spindle motor 4-position automatic too...

                  No price
                  Bannockburn, IL, USA
                • KENT USA CNL-1740 CNC PRECISION LATHE

                  • Manufacturer: Kent

                    kent usa model cnl-1740 cnc precision lathe – new product features 10 hp peak fagor servo spindle motor manual and cnc mode rigid meehanite castings with extra ribbing induction hardened and ground ways 2 speed s...

                    No price
                    Bannockburn, IL, USA
                  • 2001 Current CT300 CNC EDM Hole Driller

                    • Manufacturer: Current

                      equipped with: * current cnc controller with x, y, z readouts * 'aquarius package' for submerged machining * srj-2 unit for advanced discharge adjustability * 24 position automatic electrode changer * granite wor...

                      No price
                      Hampshire, IL, USA
                    • 1998 SMW RT 160 PY CNC Rotary Table

                      • Manufacturer: SMW

                        table platter diameter 7" maximum torque 170 ft-lbs backlash 20 arc-seconds brake torque 170 ft-lbs @ 100 psi center height 6.000" ?0.001" speeds 0.001 deg. - 60 deg./sec

                        No price
                        Wisconsin, United States

                      Have 5 seconds to help us improve the results?

                      I'll do it
                      No thanks