• 5",TOS,No. WHN 13.8P, FANUC 31i CNC CONTROL, COMPLETE RE-MANUFACTURED,WARRANTY

    • Manufacturer: TOS Varnsdorf

      remanufactured in 2015 specifications: x-axis.................................... 137.5" y-axis.................................... 78.5" z-axis.................................... 49" w-axis........................

      No price
      Bedford, OH, USA
    • 1995 5.11" TOS WHN 13.8 CNC, Heidenhain TNC 415B, 138"X, 79"Y, 49"Z, 87" x 70" Rot. Table, 50 HP

      • Manufacturer: Heidenhain
      • Spindle Diameter: 5.1"

      (1) used 5.11" tos table-type cnc horizontal boring mill, model whn 13.8 cnc, new 1995 heidenhain tnc 415b cnc controls hr 330 electronic handwheel w/ selection of axes and directional push buttons hydraulic tool...

      No price
      Chicago, IL, USA
    • 1995 5.1" Tos Model WHN 13.8 5" CNC T Type Horizontal Boring Mill

      • Manufacturer: TOS Varnsdorf
      • Spindle Diameter: 5.12"

      tos 5.1" model whn 13.8 5" cnc t type horizontal boring mill (1995)

      No price
      Elk Grove Village, IL, USA
    • 2008 Tos Varnsdorf WHN 13 10047

      • Manufacturer: TOS Varnsdorf
      • Spindle Diameter: 130 mm

      heidenhein tnc 530 cnc control full cnc built in rotary table operators lift telescopic way covers coolant

      No price
      Marietta, GA, USA
    • 2012 Tos Varnsdorf WHN 15 10053

      • Manufacturer: TOS Varnsdorf
      • Spindle Diameter: 150 mm

      heidenhain tnc 530 cnc control system fully controlled b-axis rotary table – backlash free vertical milling head – 3,000 rpm through spindle coolant thermal compensation of spindle expansion remote diagnostic ele...

      No price
      Marietta, GA, USA
    • 2012 Tos Varnsdorf WHN 13 MC 10433

      • Manufacturer: TOS Varnsdorf
      • Spindle Diameter: 130 mm

      heidenhain itnc 530 cnc control pallet changer – 2 pallets full splash guard chip conveyor coolant system through spindle coolant – 30 bar spindle head changer – 2x tool setting – tt 140 heidenhain parts measurem...

      No price
      Marietta, GA, USA
    • 1995 Tos WHN 13.8

      • Manufacturer: TOS Varnsdorf
      • Spindle Diameter: 5.1"
      • Control: HEIDENHAIN TNC 415B

      hand held pendant heidenhain tnc415b cnc controller heidenhain scales x/y/ z axis coolant system with tank steel telescoping way covers spindle chiller hard ways all over (2) 56"x 20" angle plates misc. #50 tool ...

      No price
      Chicago, IL, USA
    • 1992 Tos Varnsdorf WHN 13.8 Fanuc 16M

      • Manufacturer: TOS Varnsdorf
      • Spindle Diameter: 5.12"

      w-saddle: 49.25" | equipment: built in rotary table power draw bar coolant system operatiors plattorm all available manuals machine installed in 1996 | feed rate: .004 to 78.74 ipm | z-spindle: 49" | table size:...

      No price
      Dundee, FL, USA
    • 1991 WHN 13.8 CNC

      • Manufacturer: TOS Varnsdorf
      • Control: TNC 355

      spindle speed: 1000 /min. | spindle taper: iso 50 . | travel x-axis: 3500 mm | travel y-axis: 2000 mm | travel z-axis: 1250 mm | machine weight: 38000 kg | main motor power: 37 kw kw | max. load of table: 12000 ...

      No price
      Cleveland, OH, USA
    • 2008 WHN 13.8 CNC

      • Manufacturer: TOS Varnsdorf
      • Control: true

      chip conveyor on x direction. - indexing table: 0.001 ° - rapid feed : 1 – 8.000 mm/min. machine is in good condition.

      No price
      Cleveland, OH, USA