• BROTHER BROTHER TC-S2D 5-AXIS CNC DRILL TAP

    No price - Livonia, MI, USA
    • Manufacturer: Brother

    brother tc-s2d 5-axis cnc drill tap vertical machining center general specifications x-axis travel 19.7" y-axis travel 15.7" z-axis travel 11.8" distance between table top and spindle 7.1" to 18.9"...

  • 2012 HARDINGE GX-480-APC DRILL/TAP CENTER TK-20395

    $39,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    auto mode (x, y, z): 1417 ipm feedrate range (x, y, z): 0.1-590 ipm cutting feedrate: 472 ipm minimum increment: 0.00004” speed (belted): 10,000 rpm motor rating: 10 hp torque – 8000 rpm (15 min): ...

  • 2009 Ficep Tipo A31 Combination CNC Drill & CNC Plasma Cutting System

    No price - United States
    • Manufacturer: FICEP

    maximum stock length: 236", minimum stock length: 98.5", maximum stock width: 122", minimum stock width: 15.75", max drilling diameter: 1-9/16", max thickness drilled: 5", drilling spindles: 1, spi...

  • BIESSE CNC ROUTER-ROVER B 4.40 FTK

    $58,995 - Grand Rapids, MI, USA
    • Manufacturer: Rover

    1-used biesse rover b 4.40 ftk cnc machining center. working field: x= 145″, y= 54.3″, z= 5.9″, precision machined table, 3 back reference pin stops, 1 slide reference pin stop (lh side), centraliz...

  • 1999 SCM Routech R-250 CNC Router

    $49,950 - Sheboygan, WI, USA Recently Added
    • Manufacturer: SCM

    priced reduced from $69,950! 2 work tables, measuring 61.5" x 125", gap between tables 4.5" 10' parts can run left to right or front to back feed speeds accelerate at 2300 inches per minute no manu...

  • 1978 BRIDGEPORT PROTOTRAK CNC VERT MILL CK-20000

    $7,950 - Bethlehem, PA, USA
    • Manufacturer: Bridgeport
    • Weight: 750 LBS

    size: 9″ x 42″ t-slot, no. & size: 3 on 2.5″ centers maximum height above floor: 47.25″ spindle drive speed, inf. variable: 60 – 500 rpm (low), 500 – 4200 rpm (high) power quill feed: .0015 ipr man...

  • Accu-Systems DHPJ CNC Bore, Glue & Dowel Inserter

    $31,900 - Sheboygan, WI, USA Recently Added
    • Manufacturer: Accu-Systems

    208/230v, 3 phase, 60 hz recieving entire new motion system mechanical and electrical repairs 6 week lead time required 90-day warranty through accu-service sample specs below---will be verified ap...

  • SNX 512 TG CNC ROUTER-512 TG

    $75,000 - Grand Rapids, MI, USA

      demo model snx model 512 tg cnc router. 5×12 work area, 10 hp hsk router, “on the fly” atc, 9 spindle drill unit, fixed table moving bridge. specifications 5 x 12 fixed table moving bridge. ...

    • Mollart Omnisprint 3 SPINDLE CNC Gun Drill

      No price - Wixom, MI, USA Recently Added

        mollart omnisprint 3 spindle cnc gundrill knee type s/n a304/1-1197 spindles 3 drill dia. 0.118 " to 1/2" max drill depth  30" x axis cross travel  19.69" yaxis vert. travel  9.84" z axis travel  3...

      • Brother TC-225 CNC Drill & Tap Center

        No price - Altamonte Springs, FL, USA
        • Manufacturer: Brother
        • Control: Other

        table size: 23.62” x 11.81” x axis travel 16.54" y axis travel 11.81” z axis travel 9.84" main motor: 4.1 kw / 3.1kw spindle speed: 6,000 rpm (3000 tapping) spindle taper: # 30 tool capacity: 10 po...