• 2014 HAAS ST-35Y MULTI-AXIS CNC LATHE TK-20609

    $84,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Haas

    chuck size: 12″ cutting length without work holding: 23” bar capacity: 4” between centers: 30” x-axis: 12.5″ y-axis: +2.0” z-axis: 23″ rapids on x/y-axis: 472 ipm rapids on z-axis: 945 ipm maximum ...

  • 2008 HAAS SL-40 2-AXIS CNC LATHE TK-20468

    $69,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    chuck size: 15″ standard bar capacity: 4″ between centers: 51″ maximum cutting diameter: 25.5″ maximum cutting length: 44″ maximum cutting length w/standard workholding: 42.5″ maximum speed (gearbo...

  • 2013 DOOSAN LYNX 220LMSC MULTI-AXIS CNC LATHE TK-20574

    $74,500 - Bethlehem, PA, USA
    • Manufacturer: Doosan

    x-axis: 8.1″ z-axis: 21.7″ b-axis: 21.7” rapid traverse (x-axis): 1,181 ipm rapid traverse (z-axis): 1,417 ipm rapid traverse (b-axis): 1,181 ipm cutting feedrate: 19.7 ipm spindle speed: 4,500 rpm...

  • 1995 MORI SEIKI ZL-15SMC 5-AXIS CNC LATHE JV-20593TK

    $29,900 - Bethlehem, PA, USA
    • Manufacturer: Mori seiki

    x-axis travel (upper / lower): 8.7″ / 7.7″ z-axis travel (upper / lower): 17.7″ / 15.4″ spindle speed: 50 – 5,000 rpm spindle nose: a2-5 hole trough spindle (main): 2.0” hole trough spindle (sub): ...

  • VIPER VT-27GL 2-AXIS CNC TURNING CENTER LATHE 5

    No price - Livonia, MI, USA Recently Added
    • Manufacturer: Viper

    mighty viper vt-27gl 2-axis cnc turning center lathe serial number 8330405011         new 2006 general specifications: swing over z-cover 26.8" max. turning diameter 18.9" max. turning length 21.7"...

  • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Milltronics

    spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

  • 2000 EMCO MAIER EMCOTURN 345-II CNC LATHE TK-20600

    $22,500 - Bethlehem, PA, USA
    • Manufacturer: Emco
    • Distance between Centers: 20.1”

    speed range: 0 – 6,000 rpm torque of main spindle: 58 ft/lbs spindle nose: a2-5 spindle bore: 2.1” motor: 15 hp turret: 8 stations tool holders: vdi-30 taper: mt #4 dimensions: 105” lr x 72” fb x 8...

  • 2010 SUMMIT 26-6X120 CNC LATHE GP-20508

    $74,500 - Bethlehem, PA, USA
    • Manufacturer: Summit

    spindle bore: 6.1″ spindle nosse: a2-11 spindle speed ranges (3): 11 – 1000 rpm cross slide travel: 16” longitudinal travel: 110” z-axis feed rate: 0-196 ipm x-axis feed rate: 0-196 ipm tailstock q...

  • 1991 HARDINGE GT-27SP GANG TOOL CNC LATHE JV-20350TK

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    x-axis: 12″ z-axis: 11″ x-axis traverse rate:    472 ipm z-axis traverse rate:    630 ipm spindle motor: 5 hp speed range: 60 – 6,000 rpm allowable weight on spindle: 11.259″ 5c spindle work holdin...

  • 1999 HARDINGE COBRA 51 CNC LATHE HB-20304

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Cobra

    horsepower rating (intermittent): 20 hp horsepower rating (continuous): 15 hp torque rating(intermittent): 63 ft-lb @ 1,666 rpm base speed torque rating (continuous): 47.2 ft-lb  1,666 rpm base spe...