• 1995 MORI SEIKI ZL-15SMC 5-AXIS CNC LATHE JV-20593TK

    $29,900 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Mori seiki

    x-axis travel (upper / lower): 8.7″ / 7.7″ z-axis travel (upper / lower): 17.7″ / 15.4″ spindle speed: 50 – 5,000 rpm spindle nose: a2-5 hole trough spindle (main): 2.0” hole trough spindle (sub): ...

  • 2010 SUMMIT 26-6X120 CNC LATHE GP-20508

    $74,500 - Bethlehem, PA, USA
    • Manufacturer: Summit

    spindle bore: 6.1″ spindle nosse: a2-11 spindle speed ranges (3): 11 – 1000 rpm cross slide travel: 16” longitudinal travel: 110” z-axis feed rate: 0-196 ipm x-axis feed rate: 0-196 ipm tailstock q...

  • 2000 TOPPER TNL-100A CNC LATHE HB-20430IP

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: TOPPER
    • Spindle Bore: 2.4”
    • Spindle Nose: A2-6

    motor: 20 hp dimensions: 144” lr x 56” fb x 68” h weight: 7,770 lbs fanuc o-tb control 5c collet chuck topper bf-1200 barfeeder chip conveyor parts conveyor tailstock since we are acting as a broke...

  • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Milltronics

    spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

  • 1991 HARDINGE GT-27SP GANG TOOL CNC LATHE JV-20350TK

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    x-axis: 12″ z-axis: 11″ x-axis traverse rate:    472 ipm z-axis traverse rate:    630 ipm spindle motor: 5 hp speed range: 60 – 6,000 rpm allowable weight on spindle: 11.259″ 5c spindle work holdin...

  • 1999 HARDINGE COBRA 51 CNC LATHE HB-20304

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Cobra

    horsepower rating (intermittent): 20 hp horsepower rating (continuous): 15 hp torque rating(intermittent): 63 ft-lb @ 1,666 rpm base speed torque rating (continuous): 47.2 ft-lb  1,666 rpm base spe...

  • OKUMA #LB10 CNC TURNING CENTER

    No price - Cleveland, OH, USA Recently Added
    • Manufacturer: Okuma

    osp 5000l -g cnc control with full crt controlled axes: 2 swing over bed: (inch) 10" maximum turning diameter x maximum work length (chuck work): 5.91" x 4.72" maximum turning diameter x maximum wo...

  • Doosan Lynx 220LMA Used CNC Turning Center with Live Tools

    $79,000 - Dousman, WI, USA
    • Manufacturer: Doosan

    doosan lynx 220lma used cnc turning center with live tools specifications swing over bed ways 20.1” swing over saddle 11.4” maximum turning diameter 6.7” maximum turning length 20.1” maximum bar ...

  • OKUMA MAC-TURN 250 W MULTI AXIS CNC LATHE W/B AXIS MILLING

    No price - Warren, MI, USA
    • Manufacturer: Okuma

    we have 2 outstanding mac-turns 250w 2003 & 2005 , loaded with goodies. high pressure coolant thru spindle, sub spindle 40 atc chip conveyor lower turret including 9 tool holders 8" 3 jaw c...

  • 2005 Doosan Puma 2000Y CNC Turning Center w/ Milling & Y-Axis

    No price - Indian Trail, NC, USA
    • Manufacturer: Doosan
    • Spindle Bore: 2.99"
    • Spindle Nose: A2-6

    equipped with: 10" 3-jaw power chuck* 12 position turret w/ milling & y-axis* tool eye* lns chip conveyor* fanuc series 18i-tb cnc control