• 2010 Youngstown 50R Flat Bed 551

    • Manufacturer: Fanuc
    • Distance between Centers: 162 in 4114.8 mm

    carriage travel with tailstock removed 200 in (5080 mm), new servo motors, servo drives and spindle drive, reground hardened ways, reground ball screws on carriage and cross slide, optional spindle horsepower inc...

    No price
    Washington, PA, USA
  • No price
    Cleveland, OH, USA
  • No price
    Cleveland, OH, USA
  • 2000 LeBlond 50/30 Raised 4625 NK Tape Turn I – Flat Bed 2NK506

    • Manufacturer: Leblond
    • Spindle Bore: 3.06 in, 77.777 mm
    • Distance between Centers: 180.00 in, 4572.00 mm

    press-in center-in chuck, feedrate range .1 to 150 inches per minute, tailstock quill travel 18 in (457.2 mm), carriage length on ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick change slide tool holder,...

    No price
    Washington, PA, USA
  • 2007 Tru-Turn Model CKE6180Z CNC Flat Bed Lathe

    • Manufacturer: Bison
    • Spindle Bore: 3.9"

    spindle bore: 3.9" | equipped with: fagor 8055i/b control, 16" bison 3-jaw set true chuck, steady rest, 3/60/220 volts, manuals | spindle speed: (4) 40-1000 rpm | tool capacity: 4 position electric turret | x a...

    No price
    Elk Grove Village, IL, USA
  • 2002 21" chuck Willis Model 2680ENC 2 Axis Flat Bed CNC Lathe

      • Spindle Bore: 4.1"
      • Distance between Centers: 80"

      spindle bore: 4.1" | equipped with: anilam 4200t cnc | spindle speeds: 10 - 1400 rpm | swing over bed: 26" | tailstock travel: 12" | distance between centers: 80" | rapid speed rate (x,y,z): 200 ipm | max. swing...

      No price
      Elk Grove Village, IL, USA
    • 2007 Mazak 24" x 82" M-5N CNC Flat Bed Lathe

      • Manufacturer: Mazak
      • Spindle Bore: 4.09"
      • Spindle Nose: A2-15

      equipped with: mazatrol 640t cnc control*20.75" kitagawa 3-jaw chuck with 5.5"hole*8-position front vertical turret*6-position rear horizontal turret*steady rest*programmable tailstock*live center*jorgensen chip ...

      No price
      Indian Trail, NC, USA
    • 1993 Ravensburg KVH-4 CNC 23052

      • Manufacturer: Ravensburg
      • Spindle Bore: 7.87"
      • Distance between Centers: 236.22"

      siemens 880t cnc controls 78.74" diameter face plate chuck 43.34" diameter face plate chuck hydrostatic headstock bearings & guideways modular attachments for: boring, milling turning and id & od grinding 3-stead...

      No price
      Melville, NY, USA
    • Niles AP72H 25516

      • Manufacturer: Niles
      • Distance between Centers: 432"

      80" 4-jaw chuck steady rest inch & metric threading power rapid traverse 75 hp 480/3/60 view video on our website

      No price
      Melville, NY, USA
    • 2005 30" x 80" Colchester Harrison Alpha 1800S 2-Axis CNC Flat Bed Lathe

      • Manufacturer: Alpha
      • Spindle Bore: 6-1/2"
      • Distance between Centers: 80"

      equipped with: fanuc 21it cnc controls. 24" 3-jaw front mounted chuck with 6-3/4" hole. 21" 3-jaw rear mounted chuck. 12" capacity steady rest. 7" capacity steady rest. quick change tool post with approximately (...

      No price
      Lincolnwood, IL, USA

    Have 5 seconds to help us improve the results?

    I'll do it
    No thanks