Used cnc miscellaneous

- 407 listings found
Sort by Price: Low to High | High to Low
  • 2001 Peddinghaus ABCM 1250/3 CNC Beam Coping Machine

    • Manufacturer: Peddinghaus

      control: fagor 8025 cnc | max beam width: 50" / 1250mm | min beam width: 3" / 75mm | max beam opening: 52" / 1321mm | max flange height: 18.5" / 470mm | max plate thickness: 6" / 150mm | min plate thickness: 25"...

      No price
      Elk Grove Village, IL, USA
    • 2005 Daito Model DNE-700 CNC Beam Line

        • Capacity: 11.1 US Gallons

        maximum h beam size: 28" x 12" | minimum h beam size: 6" x 3" | coolant tank capacity: 11.1 us gallons | work length - mimimum: 60" | hydraulic tank capacity: 10.3 us gallons | spindle taper on upper head: # 4 m...

        No price
        Elk Grove Village, IL, USA
      • Techno Kawahara KSG-1000NCSP CNC Gun Drill

        • Manufacturer: Fanuc

          Equipped with: - fanuc 21m cnc control - high pressure coolant system w/chip filter - dual cartridge filters - chip conveyor - koolant koolers coolant system - 200 gallons capacity clean side - 100 gallons capaci...

          No price
          Novi, MI, USA
        • 2012 VICTOR VTURN-40 CNC LATHE TK-20601

          • Manufacturer: Victor
          • Distance between Centers: 85.2”

          X-axis travel (standard turret): 12.2” + 1.1” z-axis travel: 86.6” rapid feeds (x/z-axis): 787 ipm spindle nose: a2-11 maximum speed range: 2,500 rpm motor: 40/50 hp inside bearing diameter: 6.3” spindle bore: 4....

          $109,500 (USD)
          Bethlehem, PA, USA
        • 2012 HAAS ST-40L BIG BORE CNC LATHE TK-20671IP

          • Manufacturer: Haas

            Chuck size: 18″ maximum cutting diameter: 25.5″ maximum cutting length: 80″ bar capacity: 6.5″ x-axis: 17″ z-axis: 80” maximum thrust (x): 5,500 lbs maximum thrust (z): 9,000 lbs rapids (x): 710 ipm rapids (z): 3...

            No price
            Bethlehem, PA, USA
          • 2006 Sunfirm CST 42240 CNC Flatbed Lathe

            • Manufacturer: Fanuc

              - fanuc 0i-tc control - full enclosure - four-positions boring bar turret - boring bar attachments - 2 x chip conveyors (jorgensen) - coolant tank and pump - 2 x steady rests - four-jaws chuck (28") - miscellaneo...

              No price
              Novi, MI, USA
            • MORI SEIKI NT4300DCG/1500SZ CNC Turning & Milling Center CATEPKKM30591

              • Manufacturer: Mori seiki

                Open time: 2 june 2017 12:00 am et / close time: 28 december 2018 05:00 pm et mori seiki nt4300dcg/1500sz cnc turning & milling center, subspindle, lower turret, sn nt430120202, new 2012. capto c6 spindle taper. ...

                No price
                East Peoria, IL, USA
              • MORI SEIKI NT4300DCG/1500SZ CNC Turning & Milling Center CATEPKKM30589

                • Manufacturer: Mori seiki

                  Open time: 2 june 2017 12:00 am et / close time: 28 december 2018 05:00 pm et mori seiki nt4300dcg/1500sz cnc turning & milling center, subspindle, lower turret, sn nt430121002, new 2012. capto c6 spindle taper. ...

                  No price
                  East Peoria, IL, USA
                • 1990 MAZAK QUICKTURN 15N UNIVERSAL CNC TURNING CENTER 80170

                  • Manufacturer: Mazak
                  • Spindle Bore: 2.44"
                  • Spindle Nose: A2-6

                  Model quickturn 15n mazatrol t32 conversational cnc control 8" 3 jaw hydraulic chuck tool eye miscellaneous tool holders coolant system fully programmable tailstock chip conveyor

                  No price
                  Des Plaines, IL, USA
                • 2014 Router: Onsrud 148E24, Osai PC CNC, 5' x 12' Tables

                  • Manufacturer: C.R. Onsrud

                    (1) used c.r. onsrud cnc router, model 148e24, new 2014 --less than 300 hours!-- osai pc front series 10/510i cnc controlhigh resolution touch screeneach table low vacuum sensing shut offonsrud digital bench top ...

                    No price
                    Chicago, IL, USA