• OKUMA IMPACT LU15 CNC 4 AXIS Turning CENTER

    • Manufacturer: Okuma

      4 axis turning center w prog tailstock 2 in stock to choose from! swing over bed: 20.87" swing over carriage: 14.96" swing over crosslide: 12.99" maximum cutting diameter: 14.17" maximum turning length: 23.62" sp...

      No price
      Cleveland, OH, USA
    • VIPER VT-27GL 2-AXIS CNC TURNING CENTER LATHE 5

      • Manufacturer: Viper

        mighty viper vt-27gl 2-axis cnc turning center lathe serial number 8330405011         new 2006 general specifications: swing over z-cover 26.8" max. turning diameter 18.9" max. turning length 21.7"-59" x-travel 9...

        No price
        Livonia, MI, USA
      • 1999 HAAS SL-20 CNC Turning Center

        • Manufacturer: Haas
        • Model: SL-20
        • Spindle Bore: 3.5"
        • Spindle Nose: A2-6

        equipped with: 12 position turret* haas cnc control* sludge tank* chip auger* haas technicians have gone through the machine to make sure all is good. any repairs have been done.* running well.

        No price
        Indian Trail, NC, USA
      • Okuma LB-15 CNC Turning Center

        • Manufacturer: Okuma

          okuma lb-15 cnc turning center, s/n 4508, osp-5020l cnc control, chip conveyor, 8″ 3-jaw chuck

          $5,950 (USD)
          Fairborn, OH, USA
        • 2005 YCM TC-36W CNC Turning Center

            • Spindle Bore: 4.13″
            • Distance between Centers: 35.63″

            fanuc txp-200e control hollow 12″ chuck programmable tailstock coolant equipment chip conveyor

            No price
            Spencer, MA, USA
          • 2002 Haas SL-30T CNC Turning Center

            • Manufacturer: Haas
            • Model: SL-30T
            • Distance between Centers: 39″
            • Spindle Nose: A2-6

            tuttet: 12 position | chuck size: 10″ | spindle nose: a2-6 | approx. dims.: 162″ x 77″ x 74″ | spindle motor: 20 hp | machine weight: 16,000 lbs. | rapid traverse: 710 ipm | swing over cross slide: 14.5″ | swing...

            No price
            Spencer, MA, USA
          • OKUMA CROWN L1060 MODEL 762S-BB 2-AXIS CNC TURNING CENTER W/ IGF OPTION

            • Manufacturer: Crown

              maximum swing over bed           21.65" maximum swing over cross slide             15.75" maximum turning diameter       10.63" maximum turning length            19.68" z-axis travel, longitudinal           20.47...

              No price
              Livonia, MI, USA
            • Okuma Cadet Model LNC-8 CNC Turning Center

              • Manufacturer: Okuma
              • Model: LNC-8

                okuma cadet model lnc-8 cnc turning center, s/n c547, osp-5020l cnc control, 8″ 3-jaw chuck, tailstock, chip conveyor

                $12,500 (USD)
                Fairborn, OH, USA
              • 2012 CHEVALIER FBL-360B CNC LATHE TK-20550

                • Manufacturer: Chevalier
                • Distance between Centers: 40.1”

                spindle nose: a2-11 spindle bore diameter: 5.3” maximum spindle speed: 2,500 rpm bar capacity: 4.5” chuck size: 15” spindle motor: 35 hp transmission: 2-speed gearbox maximum torque: 933 nm @ 250 rpm or 729 ft/lb...

                $74,500 (USD)
                Bethlehem, PA, USA
              • 2012 VICTOR VTURN-40 CNC LATHE TK-20601

                • Manufacturer: Victor
                • Distance between Centers: 85.2”

                x-axis travel (standard turret): 12.2” + 1.1” z-axis travel: 86.6” rapid feeds (x/z-axis): 787 ipm spindle nose: a2-11 maximum speed range: 2,500 rpm motor: 40/50 hp inside bearing diameter: 6.3” spindle bore: 4....

                $109,500 (USD)
                Bethlehem, PA, USA

              Have 5 seconds to help us improve the results?

              I'll do it
              No thanks