• 1995 LEADWELL MCV-760AP VMC HB-20429IP

    $9,500 - Bethlehem, PA, USA
    • Manufacturer: Leadwell

    x-axis travel: 29.92″ y-axis travel: 20.08″ z-axis travel: 20.08″ spindle nose to table: 6.299″ x 26.38″ spindle center to column surface: 21.65″ table center to column: 11.81″ – 31.89″ spindle mot...

  • 2007 BRIDGEPORT XR-700 HMC CK-20324

    $49,500 - Bethlehem, PA, USA
    • Manufacturer: Bridgeport

    x-axis: 787 ipm y-axis: 787 ipm z-axis: 787 ipm working surface: 31.5” x 20” load capacity: 550 lbs x 2 per pallet spindle taper: no 40 spindle speed range: 12,000 rpm spindle motor rating (s6-40%)...

  • 2012 HARDINGE GX-480-APC DRILL/TAP CENTER TK-20395

    $39,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    auto mode (x, y, z): 1417 ipm feedrate range (x, y, z): 0.1-590 ipm cutting feedrate: 472 ipm minimum increment: 0.00004” speed (belted): 10,000 rpm motor rating: 10 hp torque – 8000 rpm (15 min): ...

  • 2007 MATSUURA ES550VPC2 VMC JV-20517CK

    No price - Bethlehem, PA, USA
    • Manufacturer: Matsuura
    • Spindle Taper: CT-40

    electrics: 200/220 volts, 3 ph, 50/60hz dimensions: will advise approximate weight: will advise matsuura g-tech 840dis cnc control (2) pallet changer 4th and 5th axis integrated through control tsu...

  • 2005 MATSUURA ES800VPC2 VMC JV-20516CK

    No price - Bethlehem, PA, USA
    • Manufacturer: Matsuura
    • Spindle Taper: CT-40

    electrics: 200/220 volts, 3 ph, 50/60hz dimensions: will advise approximate weight: will advise matsuura g-tech 840dis cnc control (2) pallet changer tsudakoma tn-131 5-axis rotary table auto power...

  • TREE VMC 4024 CNC VERTICAL MACHINING CENTER

    No price - Bannockburn, IL, USA

      tree model vmc 4024 cnc vertical machining center new 1998 motor driven with 30 hp, 3-phase, 60 cycle, ac motor and controls. equipped with: acramatic 2100 cnc controls, mpg hand held controller, 2...

    • HOLZ-HER VERTICAL CNC MACHINING CENTER-EVOLUTION 7405-K

      No price - Grand Rapids, MI, USA
      • Manufacturer: Holz-Her

      machining in x-direction routing/profiling up to 57″ without re-clamping horizontal drilling up to 51″ without re-clamping maximum work piece length without additional support: 11-1/2′ with additio...

    • HITACHI SEIKI VA-85 3-AXIS CNC VERTICAL MACHINING CENTER

      No price - Bannockburn, IL, USA
      • Manufacturer: Hitachi

      hitachi seiki model va-85 3-axis cnc vertical machining center new 1986 motor driven with 20/25 hp spindle drive motor and controls equipped with: fanuc 11m cnc controls, 30 position atc, coolant, ...

    • Alliant Model 1054-3V CNC Mill W/Anilam 5400 MK Controller 208V

      $6,500 - Watertown, CT, USA Recently Added

        mk and haas power indexing head comes w/1 vice comes w/2 chuck holders model 1054-3v 208v takes bt30 tool holders accepts m-codes for spindle forward/reverse and spindle stop there is a board that ...

      • BIESSE CNC ROUTER-ROVER B 4.40 FTK

        $58,995 - Grand Rapids, MI, USA
        • Manufacturer: Rover

        1-used biesse rover b 4.40 ftk cnc machining center. working field: x= 145″, y= 54.3″, z= 5.9″, precision machined table, 3 back reference pin stops, 1 slide reference pin stop (lh side), centraliz...