• 1/2" NATIONAL 2 DIE 3 BLOW COLD HEADER

    No price - Ivyland, PA, USA Recently Added
    • Manufacturer: National
    • Weight: 46,400 LBS

    equipped with: pko in 2nd & 3rd punches trim quick change features shut off feed piece counter installed ace-200 load monitor electronic digital readout for stock gauge tool check feature

  • 5/16 NATIONAL 56 2 DIE 3 BLOW COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: National

    equipped with: trim, pko & rko electrical specs: 440 v / 3/60 | maximum diameter: 5/16" | maximum 1st die ko: 4-1/2" | maximum 2nd die ko: 2-1/2" | maximum production: 150 ppm | maximum cutoff leng...

  • 7/64" NAKASHIMADA PF-210 2 DIE 3 BLOW COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: PPM
    • Weight: 2,500 LBS.

    equipped with: reconditioned by nakashimada 2010 dead point monitor double knife co pko 2nd & 3rd

  • 1/8" HARTFORD MODEL 2-450 COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: Hartford

    equipped with: helm part guard monitor diameter: 1/8" | co length: 1.460" | shank length: 3/4" (.781") | pieces per minute: 450

  • 1/4" ASAHI OKUMA AOS-6 COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: Okuma

    maximum diameter: 1/4" (6mm) maximum length of wire: 1-3/4" minimum length of wire: 1/4" maximum production: 250 ppm electrics: 230v / 60hz / 3 phase

  • 5/16" WATERBURY COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: Waterbury
    • Capacity: 65
    • Weight: 19,500 LBS.

    equipped with: pko approx. weight: 19,500 lbs. | pieces per minute: 150 | approx. floor space: 71" w x 136" l | maximum shank length: 2" | maximum cutoff length: 3 1/4" | maximum wire diameter: 5/1...

  • 5/16" WATERBURY COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: Waterbury
    • Capacity: 65
    • Weight: 19,500 LBS

    equipped with: pko pieces per minute: 150 | approximate weight: 19,500 lbs | maximum shank length: 2" | maximum cutoff length: 3-1/4" | maximum wire diameter: 5/16" | approximate floor space: 71"w ...

  • 1/4" NAKASHIMADA H-20A COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: PPM
    • Weight: 7,500 LBS.

    machine weight: 7,500 lbs. | maximum shank length: 2" (50mm) | maximum cutoff length: 3" (70mm) | maximum cutoff diameter: 1/4" (6mm) | maximum production speed: 200 ppm

  • 1/8" NATIONAL MODEL HS25 COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: National

    equipped with: bushing cut off diameter: 1/8" | max. cutoff length: 1-1/4" | maximum production: 400 ppm | maximum shank length: 3/4"

  • 1/8" NATIONAL MODEL HS25 COLD HEADER

    No price - Ivyland, PA, USA
    • Manufacturer: National

    equipped with: with pko, and extra heading slide diameter: 1/8" | max. cutoff length: 1-1/4" | maximum production: 400 ppm | maximum shank length: 3/4"