• 850mm 2-Hi Cold Rolling Mill

    No price - Roxboro, NC

      purpose: this mill is a roughing mill for rolling silver sheets (not coil). | manufacture: sundwig | strip width: 25.0mm max 2.0mm min | strip thickness: 850mm

    • 300mm 2-Hi MINO Cold Rolling Mill

      No price - Roxboro, NC

        purpose: rolled silver sheet (not coil) | manufacture: mino s.p.a. / new 1975 | strip width: 300mm max | strip thickness: 30mm max entry 1.0mm min exit

      • 40" 5-Stand Tandem Cold Rolling Mill

        No price - Roxboro, NC
        • Manufacturer: Blaw-Knox

        coil size: id - 24" / 610mm od - 96" max / 2438mm weight | line speed: 5000 fpm max / 1524 mpm | manufacture: blaw knox 1963 / rebuilt 1980 | strip width: 30 - 40" / 762 - 1016mm | strip thickness...

      • 1300mm 2-Hi Cold Rolling Mill

        No price - Roxboro, NC
        • Manufacturer: Achenbach / 1956

        coil size: id - 508mm / 20" od - 1200mm max / 47.2" weight - 2.0mtons max / 4400lb | line speed: 150 mpm max / 492 fpm | strip width: 700 - 1300mm / 27.6 - 51.1" | strip thickness: max entry - 2.6...

      • 78" VAI 4-Hi Cold Rolling Mill

        No price - Roxboro, NC
        • Manufacturer: Alpine

        coil size: id - 508 & 610mm / 20 & 24" od - 2000mm max / 78.7" wt - 30mtons max / 66,000lbs | prior use: steel skin pass mill | line speed: 2-speed gearbox low speed - 150mpm / 492 fpm high speed ...

      • CARL WEZEL COMBINATION 2-HI/4-HI REVERSING COLD ROLLING MILL

        No price - Newark, NJ
          • Capacity: 1000mm O.D

          * * * n e w 1 9 7 8 * * * built for danish mint roll dimension 480 mm diameter x 350 mm wide (2 hi) and 400 mm x 150mm x 350 mm wide (4 hi) this mill functioned in three differen...

        • 9" (228mm) x 20" (508mm) x 18" (457mm), RUESCH, 4-HI COLD ROLLING MILL

          No price - North Branford, CT
          • Manufacturer: RUESCH

          machine# 11401 specifications: manufacturer: ruesch year: 1966 type: 4-hi reversing cold mill (now set up as non reversing one way mill) consisting of the following...

        • 36" Achenbach 2-Hi Combination Hot and Cold Rolling Mill

          No price - Roxboro, NC
          • Manufacturer: Achenbach, 1974

          note: this mill has been dismantled and partially scrapped. - the specs below represent the mill when it was installed - the current available equipment = 1. mill stand 2. one set of rolls 3. one ...

        • 1650mm Aluminum 4-Hi Reversing Cold Rolling Mill

          No price - Roxboro, NC
          • Manufacturer: Hitachi

          coil size: id - 600mm / 23.6" od - 1750mm max / 68.9" wt - 7.6mtons max / 16,750lbs | line speed: 300-900 mpm / 984 - 2952 fpm | manufacture: loewy - ihi hitachi electrical equipment new 1967 / re...

        • 66" Two-Stand Aluminum Tandem Cold Rolling Mill

          No price - Roxboro, NC
          • Manufacturer: Blaw-Knox / Lewis

          coil size: id - 21" / 533mm od - 66" max / 1676mm wt - 13,000lbs max / 5.9mtons | line speed: 3100 fpm max / 945mpm | strip width: 27 - 66" / 686 - 1676mm | strip thickness: max entry - .275" / 6m...