• BEVELER, PEXTO, Setting Down Type, 1/2"Seam, 18Gauge, Hand Operated

    • Manufacturer: Pexto
    • Capacity: 18 Gauge
    • Weight: 90 lbs.

    s/n n/a specifications: capacity in mild steel....................... 18 gauge for seams up to.............................. 1/2" approx. weight............................... 90 lbs. hand operated

    No price
    Memphis, TN, USA
  • LOCKFORMER TRIPLEX CLEATFORMER

    • Manufacturer: Lockformer
    • Capacity: 20Ga
    • Weight: 1,000 LBS

    one (1) used lockformer triplex cleatformer s/n tr12192 specifications: • electrics: 208/230/460v / 3 ph (wired for 230v/ 3ph) • 100 fpm • motor: 5 hp • capacities: 20 ga outboard rolls, 22 ga cleats • slitter at...

    No price
    Salt Lake City, UT, USA
  • 2003 FLAGLER QUADFORMER

    • Manufacturer: Flagler
    • Capacity: 22 Ga.
    • Weight: Approximately 1200 pounds.

    one (1) used flagler quadformer s/n qf594 year: 10/2003 specifications: standard with reinforced "s" cleat & 1-1/8" drive cleat tooling in the center position. there are (2) sets of extended shafts for auxiliary ...

    No price
    Salt Lake City, UT, USA
  • 2017 Unia Karma-Araj

    • Manufacturer: Unia

      description roof with central inlet ø 250 mm with cover, side walls made of corrugated iron, funnel with outlet socket ø 440 mm, inspection shaft in the funnel, silo feet, pipe for filling the silo ø 100 mm with...

      $2,997 (USD)
      Europe
    • Tin Knocker, Manual Crimper-Beader, Cap: 24 Ga Mild Steel, Dim: 26"x16"x12", Weight: 35 lbs

        • Capacity: 24 Ga Mild Steel
        • Weight: 35 lbs

        crimp and bead in one pass of the metal, 24 ga. and lighter. comes with ogee bead, crimping tool, depth gauge and base. specifications: capacity: 24 ga mild steel ups: ups capable dimensions: 26"x16"x12" weight: ...

        No price
        Easton, PA, USA
      • Tin Knocker, No. 20, Power Flanger, Cap: 20 Ga. and Lighter, Dim: 25"x25"x41", Weight: 207 lbs

          • Capacity: 20 Ga. and Lighter
          • Weight: 207 lbs

          this power flanger has the "auto-guide" feature, which automatically controls the forming of a right-angle flange. it will contour and follow any edge, straight or curved. using the convenient table slot, the ope...

          No price
          Easton, PA, USA
        • Tin Knocker, Manual Flanger, 20 Ga x 7/32", 26"x16"x12", Weight: 35 lbs

            • Capacity: 20 Ga x 7/32"
            • Weight: 35 lbs

            puts 7/32" flange on elbows and other radius fittings. bench mounted, there is no gauge to set, and requires no special tools. makes for easy edging. specifications: capacity: 20 ga x 7/32" minimum radius: 1 3/4"...

            No price
            Easton, PA, USA
          • u 30x15

            • Manufacturer: u

              lightweight hall 7xu8aswdd sizes width: 1500 m length: 3000 m eaves height: 420 m tie distance: 300 m roof inclination: 18 ridge height: 660 m snow load: 0,75 kn/m2 wind load zone: 2 material construction: alumin...

              $43,077 (USD)
              Saxony, Germany
            • Tin Knocker, No. 724, Combination Machine, Cap: 24 Ga Mild Steel, Throat: 7", Dim: 26"x16"x12", Weight: 55 lbs

                • Capacity: 24 Ga Mild Steel
                • Weight: 55 lbs

                a multi-purpose deep throat machine, capable of forming many shapes on the sheet metal edge. comes standard with roll tooling for: turning, burring, wiring, crimping and ogee bead.. specifications: capacity: 24 g...

                No price
                Easton, PA, USA
              • 2001 RAS 20.10 Seamer

                • Manufacturer: RAS
                • Capacity: 0.039" material or (0.5-1.0mm)
                • Weight: 1600

                year: 2001 make: ras model: 20.10 condition: good electrical: 230/3phase serial #: on request machine status: under power shipping info: rigging fee extra weight: 1600 dimension: l x w x h 80" x 4' x 4' machine l...

                $14,280 (USD)
                Mooresville, NC, USA

              Have 5 seconds to help us improve the results?

              I'll do it
              No thanks