• Max Müller Cross Cutting Machine ST 25 SPS

    • Manufacturer: Mueller

      year of manufacturing 1999 speed: feeding: 1 - 40 m/min haul-off: 1 - 45 m/min | detail 1: cutting width: 120 mm max. | detail 2: cutting height: 20 mm | feed rate: adjustable in 0,1 mm increments | accessories: ...

      No price
      Geisa, Germany
    • Fecken-Kirfel Cross Cutting Machine F1 - 1300 Nr. 7-985

      • Manufacturer: Fecken-Kirfel

        detail 1: cutting width: 1300 mm | detail 2: cutting height: 35 mm max. | feed rate: 3 to 200 mm manually adjustable in 1 mm increments accuracy ±0,2 mm | motor power: 5,5 kw, 400 v, 50 hz | cutting knife: guill...

        No price
        Geisa, Germany
      • 1998 SAVI TFK-700 CROSS CUT VENEER GUILLOTINE [VC-010409]

        • Manufacturer: SAVI

          savi tfk-700 -- 700 mm (27.6") width cap., 80 mm (3.2") daylight opening, hydraulically operated by 2-hand release, 4 hp hydraulic motor. -- for crosscutting veneer with a thickness up to 1.2 mm (1/20") each sh...

          $7,110 (USD)
          United States
        • 1998 SAVI TFK-700 CROSS CUT VENEER GUILLOTINE [VC-010410]

          • Manufacturer: SAVI

            savi tfk-700 -- 700 mm (27.6") width cap., 80 mm (3.2") daylight opening, hydraulically operated by 2-hand release, 4 hp hydraulic motor. -- for crosscutting veneer with a thickness up to 1.2 mm (1/20") each...

            $7,110 (USD)
            United States
          • 1989 MONGUZZI TI-X CROSS CUT VENEER GUILLOTINE [VC-010289]

            • Manufacturer: MONGUZZI

              31-1/2" width cap., 3.2" daylight opening, hydraulically operated by 2-hand release, 4 hp hydraulic motor. -- for crosscutting veneer with a thickness up to 1.2 mm (1/20") each sheet; green guide line light show...

              $5,810 (USD)
              United States
            • Used- Circle Model V12H60 Liquid/Paste Vertical Form, Fill, and Seal Machine

              • Manufacturer: Circle

                71326009 used- circle model v12h60 liquid/paste vertical form, fill, and seal machine. unit is capable of speeds up to 60 cycles per minute. is currently configured with 5-up 5 x approximately 2.88 oz piston pump...

                No price
                Bensenville, IL, USA
              • 1989 MARIANI Slitting and length cutting/ feeding

                • Manufacturer: MARIANI

                  coil car decoiler coil opener / pinch roll unit / leveller looping pit equipment with carry-over table strip centering pinch roll unit cross-cut shear cross-cutting transfer with tong feed guillotine shear stacke...

                  No price
                  Freudenberg, Germany
                • 1994 Savi FT 3200/60

                  • Manufacturer: Savi

                    combined longitudinal and cross cutting of veneer cutting length mm: 3200,laenge diameter mm: 600, g02en2x8u cutting height mm: 60,hauptmotor kw: 4 protection device: yes, cross-cutting scissors: yes, fence: elec...

                    $14,915 (USD)
                    Upper Austria, Austria
                  • Veneer cross guillotine

                        capacity : 800 mm

                        $6,910 (USD)
                        Roches-Prémarie-Andillé, France
                      • 1992 NRM 150/30

                        • Manufacturer: NRM

                          screw 150mm, l/d 30, capacity 400-800kg/h, drive 300kw, year 1986-1992, pe, pp, ps, abs, pmma, die edi 2600mm flex lip, 3 rolls polishing unit 2620x400, 8m cooling unit, 2 rolls puller 2600mm, hydr screen changer...

                          No price
                          North Rhine-Westphalia, Germany

                        Have 5 seconds to help us improve the results?

                        I'll do it
                        No thanks