• PRATT & WHITNEY CUTTING TOOL & GAGE DIVISION C-1

    No price - North Branford, CT
    • Manufacturer: Whitney

    machine # 11993 manufacturer: pratt & whitney cutting tool & gage division type gage: electrolimit continuous width gage model: c-1 serial...

  • 1991 Pfauter PE150 27304

    No price - Washington, PA
    • Manufacturer: Pfauter
    • Model: PE150

    maximum center distance between hob and workpiece 6.30 in. (152.40 mm.), hob spindle taper iso 40, worktable diameter 6.30 in. (160 mm.), worktable bore diameter 2.48 in. (63 mm.)

  • Taylor-Hobson Talyrond 250

    No price - Washington, PA
    • Manufacturer: Taylor

    includes table, motorised radial arm traverse length may be set for up to 1.97" (50.00 mm) of travel past the spindle axis

  • Hofler EFR630

    No price - Washington, PA
    • Manufacturer: Hofler

    module: 20 | serial: 020227 | condition_info: good | wheel diameter: 24.80 in 630 mm

  • 1994 Taylor-Hobson Talysurf 120L

    No price - Washington, PA
    • Manufacturer: Taylor

    serial: 469 | weight: 25.35 lbs 11.50 kg | gauge type: phase grating interferometer, 1 mn force nominal | resolution: 12.8 nm @ 10 mm range | machine width: 5.00 in 127.00 mm | condition_info: exc...

  • 2004 Mitsubishi FS30A 30026C5

    No price - Washington, PA
    • Manufacturer: Mitsubishi

    synchronized shaving feature, gantry load and unload robot, coolant system with 5 hp, and 1 hp 50 gpm pumps,

  • 1960 Whitney S-290, 30" 11222

    $10,500 - Williamsport, PA
    • Manufacturer: Whitney

    15hp, 208-220/440v arbor motor direct drive 30" wide x 8" opening variable feed speed 3hp, 208-220/440v feed motor section infeed rooler with independently yielding 2" sections two smooth lower bed...

  • 1960 Whitney S-205, 24" H 4768

    $22,500 - Williamsport, PA
    • Manufacturer: Whitney

    medium duty single surfacer for cabinet and specialty furniture industry heavy cast construction and all gear drive wedge bed vertical adjustment 5in cutting circle, shear cut helical insert knife ...

  • Auburn End Pro 11525

    $14,900 - Williamsport, PA
    • Manufacturer: Auburn
    • Capacity: 8"

    single shaper head that produces (2) joints/cycle 8" max. width cap; 3" max. thickness equipped with single vertical spindle 7.5 hp - 5,000 to 7,000 variable rpm motor powered by ac inverter (rever...

  • Lancaster 3653 11219

    $2,000 - Williamsport, PA
    • Manufacturer: Lancaster

    three vertical cutting stations mounted in a common fabricated steel base 36" x 22" worktable designed for making raised panel doors, including stiles and rails as well as cathedral arches up to 2"...