• 24" Solberga Geared Head Drill Press

    • Manufacturer: Solberga
    • Capacity: 1.75"

    motor: 2-hp | spindle travel: 7.785" | depth of throat: 13" | spindle diameter: 3.125" | spindle feeds (4): .004/.008/.012/.016 ipr | spindle speeds (8): 48-1584 rpm | distance spindle to base: 35" - 49.5" | ver...

    No price
    Farmingdale, NY, USA
  • 24" Willis Geared Head Drill

        24" willis model se2035 geared head drill; 18" x 22" table, speeds to 3,610 rpm

        No price
        Cincinnati, OH, USA
      • Generic Buck Rogers Top Head Drill Rig #12966

        • Manufacturer: Rogers

          buck rogers top head drill rig 2 honda gas motors - 1 to run hydraulics & 1 to run water pump about 350 ft. of drill pipe - 2 or 3" diameter x 5' length drill pipe has drilled approximately 350 ft. functioning bu...

          No price
          Mifflinburg, PA, USA
        • BUFFALO SINGLE SPDL DRILL

          • Manufacturer: Buffalo

            capacity: 26" swing 7" spindle travel variable speed head with back gear spindle speeds 187 - 3,000 rpm power feed with 4 changes .03,.06,.09 & .12 1 7/8" quill diameter no. 3 mt spindle 22" x 23" table motor: 2 h.p

            No price
            Cleveland, OH, USA
          • CARLTON RADIAL DRILL

            • Manufacturer: Carlton

              capacity: 4' x 15" 36 spindle speeds: 15 - 1500 rpm 18 feed changes: 4 - 125 ipm 4 thread changes: 8, 11 1/2, 14 & 18 tpi power clamping power elevation (approximately 36" vertical travel) power left & right on t...

              No price
              Cleveland, OH, USA
            • WILTON (ARBOGA) GEARED HEAD 20" SINGLE SPINDLE

              • Manufacturer: WILTON

                (arboga) geared head made in sweden pedestal type 20" swing 5" spindle travel drill chuck 18" x 24 3/4" t-slotted swivel table geared head with 8 spindle speeds 120 - 1640 r.p.m. spindle to table 32" 2 speed 1.0...

                No price
                Cleveland, OH, USA
              • Sigourney Tool 115Volt 1Ph 3450 Rpm 1 3/8" Drill Chuck Travel 6"Head Adjustment Sensitive Drill Sigourney Tool 115Volt 1Ph 3450 Rpm 1 3/8" Drill Chuck Travel 6"Head Adjustment Sensitive Drill

                • Manufacturer: Sigourney Tool Co.

                  make: sigourney tool co. serial: m-1003012 table size: 8 1/4" x 7 3/8" (workspace) drill chuck travel: 1 3/8" drill head vertical travel: 6" 1/3 hp 115/230 volt 1ph 3450 motor rpm asset sold as is skidding & haul...

                  $900
                  Watertown, CT, USA
                • Rockwell Multi-Head Drilling Machine, 6 Drills, 101"x29"x33" Table, Good ConditionRockwell Multi-Head Drilling Machine, 6 Drills, 101"x29"x33" Table, Good Condition

                  • Manufacturer: Rockwell

                    table dimensions (lxwxh): 101" x 29" x 33" distance between drill press spindles: 15" distance from drill chuck to back column: 8.5" column height (from table): 38.5" 6 drill heads 3/4 horse power 220/440 volts t...

                    $1,950
                    Watertown, CT, USA
                  • LAMINA B10065H #3MT MODEL # HYDRAULIC DRILL HEAD

                    • Manufacturer: LAMINA
                    • Capacity: 2300 LBS.

                    serial .............................. cb455r model ............................... b10065h year new ............................ 1989 drilling capacity (1020 steel) ...... 1" tapping capacity (1020 steel) ..........

                    No price
                    Holland, OH, USA
                  • Generic CASING DRIVE HEADS #13052

                    • Manufacturer: Algemeen

                      casing drive heads designed to give protection to the top of the casing during driving operation. used drive head 8" used drive head 10" price: $800/each usd located in mifflinburg, pa yard usa

                      $800
                      Mifflinburg, PA, USA