search
  • Brandt Optimat KTD-72 Contour Edgebander

    $5,500 - United States Recently Added
    • Manufacturer: Brandt

    northeast us designed for straight and curved parts. with 10-55 mm height capacity. with minimum length of 180 mm. with 25 mm minimum radius. for band thickness of .5mm to 30 mm. with magazine for...

  • IMA Edgebander Model HKA

    $12,000 - United States
    • Manufacturer: ima
    • Weight: 580 lbs.

    midwest ima hot melt glue edgebander, designed to allow operation by feeding parts past the glue head using the table and ball rollers, or the part can be vacuum mounted to the table (vac pump and ...

  • CEHISA EP-C CONTOUR EDGE-BANDER

    $4,250 - United States
    • Manufacturer: Cehisa
    • Weight: 1000 lbs.

    southeast us rigger: not required | weight: 1000 lbs. | electric: 220 volt 60 cycle 3 phase | year of man.: 2004 | shipping footprint: 40 (length) x 36 (width) x 46 (height)

  • Brandt Edgebander w/ Double Corner-Rounding

    $32,500 - United States
    • Manufacturer: Brandt
    • Weight: 6000 lbs.

    northeast us click here for video video 2 video 3 edge band thickness 0.4 � 12 mm (0.016" - 1/2� ) coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (pvc) edgeband height 12 - 65 mm (1/2" � 2 9/16 ") p...

  • 2007 Brandt KDF 970 12610

    $90,000 - Williamsport, PA Recently Added
    • Manufacturer: Brandt

    used brandt kdf 970 ry good condition 2007 machine set up and ready for demo •edgeband thickness: 0.4 - 20mm•minimum panel length: 160mm•minimum panel width: 65mm•panel thickness: 8 - 60mm•variable...

  • DELMAC DMG 62CT or FRAVOL AZ/2 TOP & BOTTOM TRIMMER

    $3,500 - United States
    • Manufacturer: Deckel Maho

    midwest this is a low use italian made fravol az/2 top and bottom trimmer distributed by delmac in north america as a dmg 62ct. mechanically it is in excellent plus condition. it’s only downfall is...

  • Late model IMA does not come around often

    No price - United States Recently Added
    • Manufacturer: ima

    southeast us pre milling ir heating zone single reel/lipping magazine 5 pressure rollers, manually adjustable  end trimming unit 08.42 / 30 / b milling unit 08.055, for 2 motors v = max. 30 m/min. ...

  • Brandt Optimat KD-79 2/CF Edgebander

    No price - Hughesville, PA
    • Manufacturer: Brandt

    edgebanding thickness capacity: 0.4mm - 8mm panel thickness capacity: 12mm - 50mm coil feed assembly strip feeding capabilities pre-mill/joint-trimming unit pneumatic guillotine four-roll pressure ...

  • Lightly Used Biesse "Single" Contour Edgebander

    $8,500 - Canada Recently Added
    • Manufacturer: Biesse
    • Weight: 500 lbs.

    western canada very limited use biesse single contour edgebander    designed for straight, curved (contour), or beveled edgebanding. 0.4-5mm edgebanding thickness 3mm pvc banding capacity 10 - 60...

  • Brandt edgebander with corner rounding and buffing

    $19,975 Recently Added
    • Manufacturer: Brandt

    central canada machine is equipped with glue station top and bottom and end trimming profile scrapping station corner rounding station buffing station technical specificationsedgeband thickness 0....