• 78" VAI 4-Hi Cold Rolling Mill

    No price - Roxboro, NC, USA
    • Manufacturer: Alpine

    coil size: id - 508 & 610mm / 20 & 24" od - 2000mm max / 78.7" wt - 30mtons max / 66,000lbs | prior use: steel skin pass mill | line speed: 2-speed gearbox low speed - 150mpm / 492 fpm high speed ...

  • 20 ROLLS STRIP ROLLING MILL, 1978,

    No price - North Branford, CT, USA
    • Manufacturer: 1962

    machine# 11803 specifications: isotope thickness measuring producer: veb rft messelektronik gmbh dresden year of original manufacturer: 1962 year of reconstruction: ...

  • 26" x 53", SACK, SKIN PASS ROLLING MILL

    No price - North Branford, CT, USA

      machine #12455 width max. 1350 mm min. 650 mm max. reduction : 2mm to 3mm - 2% : 0.45mm to 2mm - 3% coil diameter inner 610 mm outer 1200 mm coil weight max. 12 mt min. 8 mt ra value 1.5 to 2.0 mi...

    • Rheo-Tech inc Dough rolling mill #3718

      No price - Québec, Canada
      • Manufacturer: Rheo-Tech inc

      this equipment has been reconditioned and is in excellent condition. maximum extrusion width is 20 inches. leeson control panel.

    • CARL WEZEL COMBINATION 2-HI/4-HI REVERSING COLD ROLLING MILL

      No price - Newark, NJ, USA
        • Capacity: 1000mm O.D

        * * * n e w 1 9 7 8 * * * built for danish mint roll dimension 480 mm diameter x 350 mm wide (2 hi) and 400 mm x 150mm x 350 mm wide (4 hi) this mill functioned in three differen...

      • 1 1/2" x 8" x 6" WATERBURY FARREL 4-HI ROLLING MILL

        No price - Newark, NJ, USA
        • Manufacturer: Waterbury

        manufacturer waterbury farrel type 4 hi 1 1/2" x 6" x 6" work roll driven existing rolls -work rolls -diameter 1 1/2" (38.1mm) -face width 6" (152.4mm) -back up rolls -diameter 6" (203mm) -face ...

      • 12" x 32", C O M, HOT REVERSING ROLLING MILL, 80 M/PM, 90kW, INPUT 1"

        No price - North Branford, CT, USA
        • Manufacturer: PM

        machine # 12849 manufacturer: c.o.m. type mill: 2 high hot reversing rolling mill roll size: 12.5" x 32" (320mm x 800mm) mill speed: ...

      • Gleason No. 6 Combination Hand Rolling & Power Angular Hypoid Bevel Gear Tester

        No price - Lincolnwood, IL, USA
        • Manufacturer: Gleason
        • Weight: 1,900 Lbs. (863.6 Kgs)

        equipped with: standard two-speed, 2-hp/1-hp 440 volt, 3-phase, 50/60 cycle, 1800/3600 rpm drive motor w/pulleys & belts. two-speed drum switch. forward/reverse spindle rotation. manual braking sys...

      • 2014 DAVI MCB3080; 2014; CNC 4 Roll Hydraulic Plate Bender

        No price - South Elgin, IL, USA Recently Added
        • Manufacturer: Davi
        • Capacity: 4.25" x 120"

        equipped with: davi cnc control drop end tilting electrics: 460v/3/60 | rolling speed: 20 fpm | main drive motor: 250 hp | length of top roll: 122" | diameter of top roll: 31.5" | diameter of side ...

      • 15 3/4" (400mm) x 38" (965mm) x 74" (1879mm) DANIELI-FATA HUNTER ALUMINUM

        No price - Newark, NJ, USA
        • Manufacturer: Bradley

        general specifications: manufacturer - hunter engineering product - aluminum gauge range - .250" (6mm) - .006" (.15mm) coil width - 66" (1676mm) - 33" (838mm) coil diameter - 55" (1,397mm) - 20" (...