• 4 Diameter Inch Buss Extruder #706692

        100mm diameter buss ko-kneader system, includes: buss tcs-100-16d kneader, serial # 452136, heated screw, screw driven by a 2-speed motor, 3/50/380/400/415/660/690 volt, 1481/1483/1485 rpm or 3/60/440 volt, 1780 ...

        No price
        West Windsor Township, NJ, USA
      • 2 Diameter Mm Axon Extruder #224192

        • Manufacturer: Cumberland

          60mm diameter axon carbon steel single screw extruder system, extruder is type pxr-60d, serial #91615, throughput of approximately 5 ton/hour, 60mm diameter x 1.8m long carbon steel screw, 5-electric heating zone...

          No price
          West Windsor Township, NJ, USA
        • 3/4" CW BRABENDER EXTRUDER, 40:1 L/D

          • Manufacturer: Brabender Technologie

            used 3/4" brabender extruder, 40:1 l/d, electrically heated, air cooled barrel, 5 hp dc motor with scr controller, on base with controlls

            No price
            Cleveland, OH, USA
          • 3/4" Brabender Extruder, Type EPL-V3302, 24:1 L/D

            • Manufacturer: Brabender Technologie

              used 3/4" brabender plasti-corder extruder, type epl-v3302, 18" long barrel, 24:1 l/d, electrically heated, water cooled barrel, 3 hp drive, 2500 rpm through 17:1 gearbox, 230 volts, with torque rheometer and tem...

              No price
              Cleveland, OH, USA
            • BELLAFORM BH25-25D 25mm EXTRUDER 14768

                  bellaform co-extrusion package consisting of:bellaform model bh25-25d 25mm extruder, s/n p19-330877, 10.5 kw ac motor with tach and drive, 220 volt operation, 25:1 l/d air cooled barrel with 3 heating and cooling...

                  No price
                  Elk Grove Village, IL, USA
                • DAVIS STANDARD DS25 2.5" EXTRUDER 10896

                      davis standard model ds25 2.5" extruder, s/n p1176, so# 50978, 32:1 l/d, 50 hp 500 volt 1750/2100 rpm dc motor into a 60 hp capacity 7.42:1 gearbox with a service factor of 1. @ 100 rpm, four zo...

                      No price
                      Elk Grove Village, IL, USA
                    • 3.5" Welex Single Screw Extruder, Model 350, 24:1 L/D, Air Cooled, 75HP, New in 1983

                      • Manufacturer: Welex

                        used 3.5" welex single screw extruder, model 350, 24:1 l/d, air cooled, 4 barrel zones, 3 die zones, rectangle feed throat, 75hp dc motor, 460 volt, 3 phase, 60hz, 175hp gearbox rating, 11.3 gearbox ratio, new in...

                        No price
                        United States
                      • 2" Akron Extruder, Model PAK 200, 24:1 L/D, Air Cooled, 20 Hp

                        • Manufacturer: Akron

                          used 2" akron extruder, model pak 200, 24:1 l/d, air cooled, 20hp general electric dc motor, 1760 rpm with control techniques quantum 3 drive. 13.92 gear box ratio, 3 barrel zones, 4 die zones, bagan temperature ...

                          No price
                          United States
                        • Used- Berlyn Single Screw Strand Pelletizing Line Consisting Of : (1) Berlyn 1" Single Screw Extruder, Model AX2481HD

                          • Manufacturer: Berlyn

                            48841002 used- berlyn single screw strand pelletizing line consisting of : (1) berlyn 1" single screw extruder, model ax2481hd. approximately 24 to 1 l/d ratio. electrically heated, air cooled 3 zone non-vented b...

                            No price
                            Bensenville, IL, USA
                          • Used- Reynolds Double Arm Mixer Extruder, Vacuum Rated. 2000 Liter (Approximately 528 Gallon) capacity

                            • Manufacturer: Reynolds

                              49026001 used- reynolds double arm mixer extruder, vacuum rated. 2000 liter (approximately 528 gallon) capacity. 3,200 liter (approximately 845 gallon) total volume. a bowl equipped with a common jacket rated for...

                              No price
                              Bensenville, IL, USA

                            Have 5 seconds to help us improve the results?

                            I'll do it
                            No thanks