Used fabricating

- 833 listings found
Sort by Price: Low to High | High to Low
  • 5846 Gallon Putnam Fabricating Company Stainless Steel Tank #221043

    • Manufacturer: Putnam Fabricating Company
    • Capacity: 5846 GALLON / 22156 LITER

    5,846 gallon 304ss vertical pressure tank, manufactured by putnam fabricating company, serial numbr f-777-b, national board number 10, rated 145 psi @ 212 degrees f. 8'-0" diameter x 14'-3" straight side, dished ...

    No price
    West Windsor Township, NJ, USA
  • 3682 Gallon C & B Fabricating Stainless Steel Tank ; Pressure #221019

    • Manufacturer: C & B Fabricating
    • Capacity: 3682 GALLON / 13955 LITER

    3682 gallon, 316ss, horizontal tank, manufactured by c & b fabricating, serial number4596-2, national board nuber 50, rated 15 psi @ 150 degrees f. 8' diameter x 9' straight side, welded dished heads, 3/16" shell...

    No price
    West Windsor Township, NJ, USA
  • All Steel Fabricating M-21024 7491

    • Manufacturer: All Steel Fabricating
    • Capacity: 6000 Gal

    Used 6,000 gallon all steel fabricator horizontal carbon steel storage tank. rated 15 psig @ 120 f, 33" manway, 18 ft length, 8 ft diameter, empty weight -- 9509 lbs, national board #r 4767, built 1989. previous ...

    No price
    Red Bank, NJ, USA
  • Strippit Fabricating Punch #2805

    • Manufacturer: Strippit
    • Model: SONIC 1830
    • Capacity: 30 Ton
    • Weight: 3,800 lbs

    Used strippit fabricating punch model sonic 18/30 capacity ............................ 30 ton throat depth ........................ 18 in. maximum hole thru 1/4" mild steel : 3/4" round sheet size .................

    No price
    Ronkonkoma, NY, USA
  • Unused- Buckeye Fabricating Company Pressure Tank, Approximately 50 Gallon, 304L Stainless Steel, Vertical

    • Manufacturer: Buckeye Fabricating Co.
    • Size: 1/2"

    49053012 unused- buckeye fabricating company pressure tank, approximately 50 gallon, 304l stainless steel, vertical. approximate 24" diameter x 24" straight side, dished top and bottom. internal rated 30 psi at -...

    No price
    Bensenville, IL, USA
  • Unused- Buckeye Fabricating Company Pressure Tank, Approximately 94 Gallon, 304L Stainless Steel, Vertical

    • Manufacturer: Buckeye Fabricating Co.
    • Size: 1/2"

    49053007 unused- buckeye fabricating company pressure tank, approximately 94 gallon, 304l stainless steel, vertical. approximate 24" diameter x 48" straight side, dished top and bottom. internal rated 30 psi at -...

    No price
    Bensenville, IL, USA
  • 2012 Geka Hydraulic Single End Punch w/ CNC X-Y Positioning Table #2996

    • Manufacturer: Geka
    • Capacity: 120 Ton

    Geka hydraulic single end punch w/ cnc x-y positioning table model puma-110 h30 new 2012 capacity .................... 120 ton punching ............. 1-1/4" round thru 1" 1-1/2" round thru 3/4" throat depth ........

    No price
    Ronkonkoma, NY, USA
  • 1989 138-Ton Amada FBD1253E Hydraulic Up-Acting Press Brake

    • Manufacturer: Amada
    • Stroke: 3.94″
    • Capacity: 26.4 gal

    Model nc9-ex ii amada cnc 3-axis back gauge misc. tooling manuals flush floor mount machine

    No price
    Spencer, MA, USA
  • 2015 Used 3/4″ x 78″ Sertom RIMI 4RV-Bull 20-14 Plate Roll, 4-Roll RIMI 4V-Bull 20-14

    • Manufacturer: Capacity

      Hardened and ground rolls overhead vertical support

      No price
      Spencer, MA, USA
    • 1996 REDUCED PRICE - 20" Everett Cut-Off / Met Lab Saw

          20" everett wet abrasive oscillating cut-off / met lab saw with coolant system, wet hood and mist collector; 20" diameter wheel capacity, 20 hp motor, hydraulic powered head, pneumatic vise, gravity feed roller c...

          $1,950 (USD)
          Cincinnati, OH, USA