• Yamada #15068HH

    No price - Monclova, OH, USA
    • Manufacturer: Yamada

    model #:  n/a serial #:  n/a 5″ -29″ estimated part length with tooling 12″ -31″ spindle face to face 2 hp spindle motors machine heads are mounted on twin recirculating type ball slides and fed by...

  • 52" Aluminum Tension Leveling/Trim Line - Light Gauge

    No price - Roxboro, NC, USA
    • Manufacturer: Mckay

    material: aluminum and its alloys | coil size: entry id - 16" od - 84" (90" clearance) exit id - 9", 12", 16" arbors coil weight - 17,000 lbs. | line speed: 1250 fpm | manufacture: stamco/mckay - ...

  • 18" - 4" (457-100mm) STRIP EDGING LINE

    No price - Newark, NJ, USA
    • Manufacturer: Delta
    • Capacity: 2500 LBS. (1134 KG)

    specifications: purpose: to flatten and contour edge strip width range: 4" (100mm) minimum 18" (447mm) maximum payoff: manufacturer: littell machine co. type: automatic centering reel model no.:...

  • 2080mm x 15mm Cut-to-Length Line

    No price - Roxboro, NC, USA
    • Manufacturer: FIMI

    line speed: 22 mpm max / 72 fpm | manufacture: fimi (italy), new 1976 upgrades 1994,2009,2011,2012 | shear speed: 15 cuts/min max | cut tolerance: +/-0.5mm tolerance to 3 meters then add +/-0.1mm ...

  • 7,500# x 20" Rowe Uncoiler. Ref # 9736-HK

    No price - Toledo, OH, USA
    • Manufacturer: Rowe

    used rowe automatic centering reel model: 7520-ds/l -manual expansion: 17" - 20" -27.5" face mandrel -(4) segment mandrel -link type expansion -(4) segment mandrel -motorized with loop control arm ...

  • 10,000# x 72" Braner/Ranger Banding Line. Ref # 5997-EX

    No price - Toledo, OH, USA
    • Manufacturer: Ranger

    consisting of the following: -downlayer: braner 10,000 lb. x 72" o.d. capacity compound tilt 3.5" dia. x 76.25" face driven rolls 1" hex shafts hyd. motor driven rolls 82" x 75" top hydraulic actu...

  • FORKARDT F 200 Turning lathe accessories (chucks, face chucks, others)

    No price - Wiesbaden, Germany
    • Manufacturer: FORKARDT

    well-preserved three-jaw chuck wedge with centering . hard ground and hard jaws, chuck key

  • FRIEDRICH DECKEL Turning lathe accessories (chucks, face chucks, others)

    No price - Wiesbaden, Germany
    • Manufacturer: Deckel Maho

    well-preserved three-jaw chucks with scroll, with centering inner and. outer jaws, chuck key

  • NAREX Permag 160 Turning lathe accessories (chucks, face chucks, others)

    No price - Wiesbaden, Germany
    • Manufacturer: NAREX

    used, but well-preserved magnetic chuck, diameter 160 mm, height 60 mm, centering ø 135 mm, weight 5.7 kg not available

  • 1970 BAIER ZPD-S 1/100 #1052-11005

    No price - Bühl, Germany Recently Added
    • Manufacturer: Baier
    • Weight: 280 kg

    origin: germany | fine feed: 10 mm/min | quotation: ex works, loaded on truck | drive motor: 3,7 kw | feed speeds: max. 4000 mm/min | rapid speed: 6 m/min | control-type: conventional | face diame...