Used falling film

- 87 listings found
Sort by Price: Low to High | High to Low
  • Tube - Rising And Falling Film Evaporator #215278

    • Manufacturer: Fritz Voltz sohn

      Approx 2.4 m3/hr @ 99.65% water evaporation 316 stainless steel 5-effect falling film evaporator system, manufactured by fritz voltz sohn, 1st effect is 46 sqm, 2nd 46 sqm, 3rd 46 sqm, 4th 6 sqm, all 568mm diamet...

      No price
      West Windsor Township, NJ, USA
    • Tube - Rising And Falling Film Evaporator #215279

          22400 lbs/hr 316 s/steel 4-effect kestner falling film evaporator system, product flow rate 5600 lbs/hr @ 48 deg c, feed flow rate 22400 lbs/hr @ 90 deg c, 1st effect is 14" diameter x 20' high, 2nd 21" diameter ...

          No price
          West Windsor Township, NJ, USA
        • Rising Falling Film Evaporator

          • Manufacturer: APV

            This is a 2,050 lb/hr apv 1 effect finisher evaporator. type p-e, serial number 1340. it employs a forced circulation rising-falling film principle of evaporation. this unit includes the evaporator frame with ...

            No price
            Louisville, KY, USA
          • 1997 Niro Single Effect Falling Film Evaporator, Type TVR

            • Manufacturer: Niro

              One (1) used niro single effect falling film evaporator, 316/304 stainless steel construction, tvr design, approximately rated 22,000 pph input at 48% solids, output at 54% solids, 1230#/hour water evaporation ra...

              No price
              Cleveland, OH, USA
            • Evaporator, Falling Film, Clean Steam, Mueller, PSG P7140

              • Manufacturer: Mueller

                Mueller psg p7140 pure steam generator, clean steam generator, all pharmaceutical grade 316l stainless steel contacts. rated for capacity of 1500 lbs/hr @ 45 psi with 120 psi steam supply. shell & tube sides rate...

                No price
                Brisbane, CA, USA
              • Used- Niro Single Effect Falling Film Evaporator, Rated 22,000 PPH input at 48% solids

                • Manufacturer: Niro

                  43564015 used- niro single effect falling film evaporator, rated 22,000 pph input at 48% solids. output rated at 22,000 lbs per hour, 48% solids inlet, 54% solids output, 1,320 lbs per hour water evaporation. sta...

                  No price
                  Bensenville, IL, USA
                • Used- Niro Single Effect Falling Film Evaporator, Rated 22,000 PPH input at 48% solids

                  • Manufacturer: Niro

                    43564014 used- niro single effect falling film evaporator, rated 22,000 pph input at 48% solids. output rated at 22,000# per hour, 48% solids inlet, 54% solids output, 1,320# per hour water evaporation. stainless...

                    No price
                    Bensenville, IL, USA
                  • Weigand Falling Film Evaporator

                        Weigand falling film evaporator (3 effect with finisher) – 1972 unit is tvr feed flow 17,500l/h feed solids 9.5% feed temperature 9°c preheater range 90-110°c steam use 4.8t/h @10bar condenser load 3750kw

                        No price
                        Hutton Rudby, United Kingdom
                      • Falling Film

                        • Manufacturer: Falling Film

                          Number of plates: 54 // plate sizes: 1000x1970 mm (wxh) // incoming pipe: 110 mm / outcoming pipe: 150 mm

                          No price
                          Hillegom, Netherlands
                        • Wiegand Triple Effect Falling Film Evaporator

                              Wiegand triple effect, continuously operating vacuum falling-film evaporator with thermo-compression and directly connected high-concentrator (final effect) designed for the food industry. ex food use and still i...

                              No price
                              Hutton Rudby, United Kingdom