• Harperizer 4HA12 centrifugal barrel finishing machine, 4 barrels, New PLC #3413

    $12,000 - Connecticut, United States
    • Manufacturer: HARPER

    asset description notes: harperizer 4ha12 high energy finishing machine barrels 4, eurothane lined barrels size of barrels 12" x 12" total volume per drum 2 cu. ft. air supply 70 psi baldor...

  • Sweco FMS 14-LR vibratory finishing mill, 14 cubic foot, 10 HP, Internal Separation #3259

    $22,500 - Connecticut, United States
    • Manufacturer: Sweco

    asset description notes: sweco fms 14-lr vibe finishing mill long radius curved wall burnisher motor 10 hp grease lubricated motion generator chamber lined with 95 durometer polyurethane chamber di...

  • Cyclo Blast Model 3224F Blast Cabinet #3574

    $600 - Connecticut, United States Recently Added
    • Manufacturer: Cyclo Blast

    asset description notes: cyclo-blast model 3224f blast cabinet self-contained 300 cfm reclaim bag house & dust collector gloves cabinet lights work chamber measures 32?w x 24?d x 29-1/2? h one side...

  • 1999 Sonicor Aqueous Ultrasonic CPS4-2024 series automatic cleaning system with RCT auto transport. #2476

    $55,000 - Connecticut, United States
    • Manufacturer: Sonicor

    asset description notes: sonicor aqueous ultrasonic cps4-2024-wsrr automatic cleaning system. 4 stage system with dryer station. stations: ultrasonic wash, spray immersion rinse, spray immersion ri...

  • Baird 2 cu.ft. tumbling barrel, Model 2H, hydraulic dump #3282

    $6,950 - Connecticut, United States
    • Manufacturer: US Baird

    asset description notes: baird 2h tumbling barrel, 2 cu.ft. barrel dims 22" dia opening x 25" base dia x 26" depth. automatic hydraulic dump system motor 1 hp, 220/440 volt timer ---no liner---

  • Nova Finishing 501 HT

    $1,400 - Watertown, CT, USA
    • Manufacturer: Nova

    make: nova finishing model: 501 ht capacity: 1/2 cu.ft liquid cap: 4 gallon max weight of steel media: 200-230 lbs max weight of ceramic media: 70-90 on/off timer (60 min) 1/3 hp 110 volts 1 ph hea...

  • Textima Pin / Clip Tenter Range 90 inch width UpGraded Allen Brady Inverter Drives

    No price - Spartanburg, SC, USA Recently Added
    • Manufacturer: Allen

    a – 1996 – 90” e & l stainless steel entry guiders, driven scroll rolls, pivot 3 roll guider, digital controls b- 90” maximum width, vertical pin / clip tenter chain , over/under feed system, bow/s...

  • Barrett Model 152, Chip Wringer #3428

    $2,500 - Connecticut, United States
    • Manufacturer: L J Barret

    asset description notes: barrett model 152, chip wringer 100 lb. load capacity 20 loads per hour pan 18" diameter, 8" deep motor 2.5 hp new electrics

  • Vibra Finish VF-4FB, 4 cubic foot curved wall vibratory bowls #2475

    $6,000 - Connecticut, United States
    • Manufacturer: Vibro Finish

    asset description notes: vibra finish vf-4fb, 4 cubic foot curved wall, flat bottom vibratory bowls. channel width 9". tub diameter 46". water inlet and spray. drain. 2hp motor, 230 volt. controls ...

  • 1999 Ultra Kool Cold Trap Plus liquid vapor degreaser, model 2420, Sonics, Superheat, ALS-50 Lift System #2849

    $39,500 - Connecticut, United States
    • Manufacturer: Ultra Kool

    asset description notes: ultra kool, cold trap plus, model 2420 liquid vapor degreaser. neshap compliant design. the unit will accept any of the currently approved solvents, from the existing chlor...