• 1983 Saint Etienne CNC Lathe – Flat Bed

    • Manufacturer: Fanuc
    • Spindle Bore: 3.24 in 82.30 mm
    • Distance between Centers: 315.00 in 8001.00 mm

    one or two carriages, tailstock quill travel 12 inch (305mm), steady rests, new servo motors, new servo drives and spindle drive

    No price
    Washington, PA, USA
  • Linseis L6514-4 1mV-50V 4-Channel Lab Flat Bed Graph Chart Recorder

        the linseis l6514-4 1mv-50v 4-channel lab flat bed graph chart recorder is ideal for use in research, development, and production as well as in service and education.

        No price
        East Lyme, CT, USA
      • No price
        Cleveland, OH, USA
      • No price
        Cleveland, OH, USA
      • 2000 LeBlond 50/30 Raised 4625 NK Tape Turn I – Flat Bed 2NK506

        • Manufacturer: Leblond
        • Spindle Bore: 3.06 in, 77.777 mm
        • Distance between Centers: 180.00 in, 4572.00 mm

        press-in center-in chuck, feedrate range .1 to 150 inches per minute, tailstock quill travel 18 in (457.2 mm), carriage length on ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick change slide tool holder,...

        No price
        Washington, PA, USA
      • 2007 Tru-Turn Model CKE6180Z CNC Flat Bed Lathe

        • Manufacturer: Bison
        • Spindle Bore: 3.9"

        spindle bore: 3.9" | equipped with: fagor 8055i/b control, 16" bison 3-jaw set true chuck, steady rest, 3/60/220 volts, manuals | spindle speed: (4) 40-1000 rpm | tool capacity: 4 position electric turret | x a...

        No price
        Elk Grove Village, IL, USA
      • 8" chuck Nardini Model Fast Trace CNC Flat Bed Lathe

        • Manufacturer: Fast
        • Spindle Bore: 2"
        • Distance between Centers: 40"

        spindle bore: 2" | spindle nose: d1-6 camlock | equipped with: fanuc 21it cnc w/ teach mode | spindle speeds: 18 speeds 37.5 - 3,000 rpm | swing over bed: 17.5" | main motor drive: 8 hp | maximum cutting length:...

        No price
        Elk Grove Village, IL, USA
      • 1999 Sterling T/A 21' Flat Bed Water TanK Truck #7023369-01

        • Manufacturer: Sterling

          1999 sterling lt9513 t/a 21' flat bed water tank truck, cat c12 12.0l diesel, 8 speed transmission, 1500 gal water tank, 125 gal fuel transfer tank, auto crane 3203 prx, gvw 64000, odometer reads: 285,891 (unveri...

          $18,000
          Iowa, United States
        • 1993 41” x 197” RYAZAN CNC Flat Bed Lathe

              41 x 197 ryazan cnc flat bed lathe model rt755f3. fanuc 0-t control with heidenhain scale feedback8 station indexing turret, powered tailstock travel. also sold as stankonew in 1993. serial no. rt755f3-577-1. sto...

              No price
              Houston, TX, USA
            • Monarch 48" x 156" CNC Flat Bed Lathe

              • Manufacturer: Monarch

                equipped with: fagor 8055 cnc pendant controls (2006)*24" chuck with 10.5" hole*36" chuck with 6" hole*two steady rests 28" and 20"* tooling*extra turret base*all manuals & documentation*f.o.b. charlotte, nc

                No price
                Indian Trail, NC, USA