• 2010 Youngstown 50R Flat Bed 551

    • Manufacturer: Fanuc
    • Distance between Centers: 162 in 4114.8 mm

    carriage travel with tailstock removed 200 in (5080 mm), new servo motors, servo drives and spindle drive, reground hardened ways, reground ball screws on carriage and cross slide, optional spindle horsepower inc...

    No price
    Washington, PA, USA
  • 2000 LeBlond 50/30 Raised 4625 NK Tape Turn I – Flat Bed 2NK506

    • Manufacturer: Leblond
    • Spindle Bore: 3.06 in, 77.777 mm
    • Distance between Centers: 180.00 in, 4572.00 mm

    press-in center-in chuck, feedrate range .1 to 150 inches per minute, tailstock quill travel 18 in (457.2 mm), carriage length on ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick change slide tool holder,...

    No price
    Washington, PA, USA
  • 2007 Tru-Turn Model CKE6180Z CNC Flat Bed Lathe

    • Manufacturer: Bison
    • Spindle Bore: 3.9"

    spindle bore: 3.9" | equipped with: fagor 8055i/b control, 16" bison 3-jaw set true chuck, steady rest, 3/60/220 volts, manuals | spindle speed: (4) 40-1000 rpm | tool capacity: 4 position electric turret | x a...

    No price
    Elk Grove Village, IL, USA
  • 2002 21" chuck Willis Model 2680ENC 2 Axis Flat Bed CNC Lathe

      • Spindle Bore: 4.1"
      • Distance between Centers: 80"

      spindle bore: 4.1" | equipped with: anilam 4200t cnc | spindle speeds: 10 - 1400 rpm | swing over bed: 26" | tailstock travel: 12" | distance between centers: 80" | rapid speed rate (x,y,z): 200 ipm | max. swing...

      No price
      Elk Grove Village, IL, USA
    • 6″ Bison 3-Jaw Chuck

      • Manufacturer: Bison

        reversible top jaws type: flat back | thickness: 2 1/2″ | thru hole: 1 1/2″

        No price
        Spencer, MA, USA
      • 10″ Poland 4-Jaw Independent Chuck

            4 t-slots solid reversible jaws type: flat back | thickness: 3 3/8″ | thru hole: 2 1/2″ | approx. weight: 520 lbs.

            No price
            Spencer, MA, USA
          • DE LAVAL, VALVE, FLAT TYPE, AIR LOCK, SIZE: 12" DIAMETER, STAINLESS STEEL, #003059

            • Manufacturer: De laval

              housing mat'l : stainless steel, blade mat'l: stainless steel, 0.5 h.p. "gearmotor", 575 volt, 1750 rpm, frame: 145t, "boston" reducer, ratio 40:1, output rpm: 43, belt drive to rotary valve,

              No price
              Laval, Canada
            • DE LAVAL, VALVE, FLAT TYPE, AIR LOCK, SIZE: 12" DIAMETER, STAINLESS STEEL, #003060

              • Manufacturer: De laval

                housing mat'l : stainless steel, blade mat'l: stainless steel, 0.5 h.p. "gearmotor", 575 volt, 1750 rpm, frame: 145t, "boston" reducer, ratio 40:1, output rpm: 43, belt drive to rotary valve,

                No price
                Laval, Canada
              • MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS

                • Manufacturer: Marshall

                  diameter of forging dies 6" width of roll dies 6" press set up to receive flat back segmental dies equipped with: roll shaft extensions for operation die mounting of overhanging rolls air clutch brake hand t...

                  No price
                  Newark, NJ, USA
                • Used- 3v Cogeim Type Filtrodry Fpp010 Sd/Fm Hastelloy C22 Nutsche Filter Dryer

                  • Manufacturer: Cogeim SPA

                    48598001 used- 3v cogeim type filtrodry fpp010 sd/fm hastelloy c22 nutsche filter dryer. has approximately 350mm diameter filter plate with 0.10 sq. mt. filtration area. 130 litre total capacity and 60 litre slur...

                    No price
                    Bensenville, IL, USA

                  Have 5 seconds to help us improve the results?

                  I'll do it
                  No thanks