• ROCKWELL/DELTA 17-611 #4527

    No price - Baltimore, MD, USA
    • Manufacturer: Delta

    model: 17-611 s/n 6-2988 specifications: drill to the center of a 17” diameter drilling capacity: 7/8” in c.i. spindle speeds (5-step pulley): 700- 4,200 rpm spindle: 2 mt spindle travel: 0 - 5” qu...

  • ZTS LE-250

    No price - Washington, PA, USA
    • Manufacturer: ZTS
    • Capacity: 250.00 ton 2491 kN

    height listed is above floor total height is 142 inches (3610 mm)

  • 1984 ZTS LE-400 Gap / C Frame Cold Press

    No price - Washington, PA, USA
    • Manufacturer: ZTS
    • Capacity: 400.00 ton 3985 kN
    • Stroke: 6.30 in 160.00 mm

    throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

  • 1973 Voronezh K8542 Hot Forging Press

    No price - Washington, PA, USA
    • Manufacturer: Voronezh
    • Capacity: 1600 / 1760 ton 15940 / 17540 kN
    • Stroke: 12.00 in 300.00 mm

    height shown is above floor level, distance between table and bolster plate 26 in ( 660 mm)note: table / wedge assembly not installed on this machine

  • United Shoe Machine B Swinghead Hydraulic Press/clicker USM Hytronic

    $5,000 - Rhode Island, United States Recently Added
    • Manufacturer: United Shoe Machine

    usm hytronic model b swinghead hydraulic press/clicker. this machine is used to cut all types of leather, plastic and fabric upper materials. it is also used for cutting sock linings, outsoles, lin...

  • Rouselle 60 Ton

    $10,800 - Washington, PA, USA
    • Manufacturer: Rousselle

    category: presses, gap/c frame, mechanical manufacturer: rousselle model: 6b 60 serial number: fbsa7794 year: 1966 capacity: 60.00 ton 597.8406 kn speed: 110 spm variable ram / slide stroke: 5.00 i...

  • 14203 70 TON PHI HEATED PLATEN PRESS H4D-250V

    $7,950 - York, PA, USA
    • Manufacturer: PHI

    70 ton phi heated platen press price: loaded on truck, our warehouse, york, pa …… $7,950.00 stock # 14203 serial # 1374 model: h4d-250v platen area: 18-3/8" wide x 22" long distance between fram...

  • 140 Ton TISHKEN #CO-18-4-30 4-Post Cut-Off Press

    No price - Perrysburg, OH, USA
    • Manufacturer: Tishken

    419-872-2364 / sales@utubeonline.com 140 ton x 4" tishken #co-18-4-30 4-post cut-off press, stock #3339 serial number: - 15267 age: - 1967 specification...

  • PLATARG 312 eyelet transfer press, 13 stations, 3 tons per station, Stroke 60mm

    $54,900 - Connecticut, United States
    • Manufacturer: PLATARG

    platarg 312 eyelet transfer press stations 13 capacity 3 tons per station stroke 2-3/8"(60mm) depth of draw 1-1/16"(27mm) ram pitch 2-1/2"(63mm) motor 10hp speed 70-210 straight roll feed chopper t...

  • 150 TON NIAGARA SA2-150-42-36 STRAIGHT SIDE DOUBLE CRANK HIGH SPEED PRESS

    No price - Bannockburn, IL, USA
    • Manufacturer: Niagara
    • Capacity: 150 Tons
    • Stroke: 2″

    serial no. 38566                                           new 1963 equipped with air clutch inch/single/continuous stroke controls 36″ x 42″ x 6″ drilled & tapped bolster for bed 30″ x 42″ x 2″ dr...