• 1985 Smeral LZK2500

    No price - Washington, PA, USA
    • Manufacturer: Smeral
    • Capacity: 2500 / 2750 Ton 24900 / 27400 kN
    • Weight: 320000 lbs, 145455 Kg

    28 strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster

  • ZTS LE-250

    No price - Washington, PA, USA
    • Manufacturer: ZTS
    • Capacity: 250.00 ton 2491 kN

    height listed is above floor total height is 142 inches (3610 mm)

  • 1984 ZTS LE-400 Gap / C Frame Cold Press

    No price - Washington, PA, USA
    • Manufacturer: ZTS
    • Capacity: 400.00 ton 3985 kN
    • Stroke: 6.30 in 160.00 mm

    throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

  • 100 TON WILKINS & MITCHELL HOT FORGING PRESS

    No price - Newark, NJ, USA

      rebuilt and retrofit 2017 to hot forge bolt tonnage us ton 125 capacity m42 dia length 800 stroke 8" spm 45 shut height 24" bed area 30( front to back) 40" ( left to right) copy and paste thi...

    • AJAX MODEL #6 FORGING ROLL

      No price - Newark, NJ, USA
      • Manufacturer: Ajax
      • Weight: 160,000#

      width of roll dies ................................. 60" maximum roll die dia. .............................. 44" maximum length rolled section ...................... 82" weight, approx. .............

    • 700 TON NATIONAL MAXIPRESS FORGING PRESS

      No price - Newark, NJ, USA
      • Manufacturer: National
      • Stroke: 8"

      700 ton national maxipress spm .................. 90 stroke ............... 8" shut height .......... 21-9/16" - 22" tie rod dia. ......... 6-3/4" floor space .......... rl 8'11" ...

    • MARSHALL-RICHARDS DOUBLE HOUSING TYPE FORGING ROLLS

      No price - Newark, NJ, USA
      • Manufacturer: Marshall

      diameter of forging dies 6" width of roll dies 6" press set up to receive flat back segmental dies equipped with: roll shaft extensions for operation die mounting of overhanging rolls air clut...

    • 1987 GFM SX 06 10114

      No price - Marietta, GA, USA
      • Manufacturer: GFM
      • Weight: 26 Ton

      pump engines: 33 kw | forging force: 80 ton | forging engine: 45 kw | forging eccentric: 3 mm | number of hammers: 4 | cooling water supply: 4 - 5 bar | firing hammer length: 150 mm | tightening h...

    • 1975 GFM SX 55 10112

      No price - Marietta, GA, USA
      • Manufacturer: GFM
      • Weight: 700 Ton

      2 automated forging manipulators 4 hammers force: 1,000 ton each | stroke per minute: 200 | maximum forging diameter: 550 mm | maximum clamping diameter: 550 mm | approximate machine weight: 700 to...

    • 2006 .75CuFt,Hammond Roto-Finish,RotoMax RM-1P,Centrifugal Disc Finisher,Pwr.Sep. #40738

      No price - Lincolnshire, IL, USA
        • Capacity: 0.75 Cu.Ft.
        • Weight: 1,875 Lbs.

        new - 2006 serial no. rm-1p-a4-06 roto-max is a high speed finishing system for deburring, surface improvement, descaling, and finishing parts made of metal, rubber, or plastic. machines reduce vib...